Package: amanda-client Source: amanda Version: 1:3.3.5-1 Architecture: amd64 Maintainer: Jose M Calhariz Installed-Size: 841 Depends: libc6 (>= 2.4), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.28.0), libreadline6 (>= 6.0), libssl1.0.0 (>= 1.0.0), amanda-common (= 1:3.3.5-1) Suggests: gnuplot, dump, smbclient Conflicts: amanda Breaks: amanda-common (<< 1:2.5.2p1-3) Replaces: amanda-common (<< 1:2.5.2p1-3) Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-client_3.3.5-1_amd64.deb Size: 290386 SHA256: 4882862588baf4765c020b7f3fb2230417b134c3d48361f9c637c12b0af99083 SHA1: c3864b2c0ebc7e62a0cc41ce8a9753990b1a2fa4 MD5sum: c62548ecf2db33c7fd6a0c3450d908e3 Description: Advanced Maryland Automatic Network Disk Archiver (Client) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK. . For important notes, see /usr/share/doc/amanda-client/README.Debian. . Explanation of suggested programs: - gnuplot is needed for plotting statistics of backups Package: amanda-common Source: amanda Version: 1:3.3.5-1 Architecture: amd64 Maintainer: Jose M Calhariz Installed-Size: 7300 Depends: debconf (>= 0.5) | debconf-2.0, perl (>= 5.14.2-21+deb7u1), perlapi-5.14.2, libc6 (>= 2.7), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.31.8), libssl1.0.0 (>= 1.0.0), update-inetd, tar (>= 1.12), perl5, bsd-mailx | mailx, adduser, openbsd-inetd | inet-superserver Suggests: amanda-server (= 1:3.3.5-1) | amanda-client (= 1:3.3.5-1) Conflicts: amanda Replaces: amanda, amanda-client Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-common_3.3.5-1_amd64.deb Size: 2392882 SHA256: d977335d9efc19fb49fc2361ade15129dc9ab72dc77d0466607ed1e9f84fed89 SHA1: 3231d0532acf8ff95c55a9043b5687b1b1347686 MD5sum: 2ebdca348f2430cffc71aeb5f779c840 Description: Advanced Maryland Automatic Network Disk Archiver (Libs) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . This package contains libraries and other required files that are shared between the amanda-client and amanda-server packages Package: amanda-server Source: amanda Version: 1:3.3.5-1 Architecture: amd64 Maintainer: Jose M Calhariz Installed-Size: 919 Depends: libc6 (>= 2.4), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.28.0), libssl1.0.0 (>= 1.0.0), amanda-common (= 1:3.3.5-1), bsd-mailx | mailx Suggests: perl5, gnuplot, amanda-client (= 1:3.3.5-1), cpio | mt-st Conflicts: amanda Breaks: amanda-common (<< 1:2.5.2p1-3) Replaces: amanda-common (<< 1:2.5.2p1-3) Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-server_3.3.5-1_amd64.deb Size: 355988 SHA256: 810ad4311da8ac1228c1b73ba404eff26a7b1ea0e3e0c7b4407e20d87fad2c18 SHA1: a08a51c19c87ed2092ca8b9b74058cf86e5a00fe MD5sum: b75cc2081381d545f7fffe9b9ec5e7d9 Description: Advanced Maryland Automatic Network Disk Archiver (Server) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . For important notes, see /usr/share/doc/amanda-server/README.Debian. . Explanation of suggested programs: - perl is needed for some non essential server utilities - gnuplot is needed for plotting statistics of backups - to backup the tape server, you need to install the client too Package: apache-tomcat Version: 7.0.53-3 Architecture: amd64 Maintainer: Jose M Calhariz Installed-Size: 13828 Depends: oracle-java8-installer, libtcnative-1 Homepage: http://tomcat.apache.org/ Priority: extra Section: dsi Filename: pool/main/a/apache-tomcat/apache-tomcat_7.0.53-3_amd64.deb Size: 8811662 SHA256: 1b1a22866f052ebe3b64736e20569856bc1ebdddf83a6a89385c1f6c9446a91e SHA1: c7298ec902ec5ffdb2bef49ca29baa0fad05a329 MD5sum: 041b3d17471897e707c78ec6d9df1009 Description: Apache tomcat, build from apache This package contains the build of tomcat as made by Apache. Package: awesant Version: 0.13-3 Architecture: all Maintainer: Jonny Schulz Installed-Size: 202 Depends: liblog-handler-perl (>= 0.75), libparams-validate-perl, libjson-perl, libclass-accessor-perl, libsys-hostname-long-perl Suggests: libio-socket-ssl-perl Homepage: http://www.bloonix.de/ Priority: extra Section: net Filename: pool/main/a/awesant/awesant_0.13-3_all.deb Size: 52740 SHA256: 335376f3e5d02815aa1c1a046177a0435e315fddd56e78717b4630e65fc50a7a SHA1: 0178a35479bcc42e6681ab7bcf5d56bccdb3b990 MD5sum: 998b665c2327b93a2d10582b2c0fffa8 Description: awesant-agent Awesant is a log shipper for logstash. Package: cal-desktop Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: tp-desktop | dsi-desktop, tp-core, tp-admin, tp-comm, tp-emacs | tp-srv-emacs, tp-security | tp-security-min, tp-net, tp-net6, apticron, stress, signing-party, keyanalyze, sawfish, sawfish-merlin-ugliness, sawfish-themes, theme-converters | tp-na, tcpdump, ethereal | wireshark, tethereal | tshark, nvidia-settings | tp-na-powerpc | tp-na-alpha | tp-na-sparc, gnupg, geg, gringotts, gnumeric, wv | mswordview, xv, dia, rsibreak, xmms | audacious | bmpx | xmms2, xmms-skins | audacious | bmpx, xtv Recommends: xmms | bmpx | audacious-plugins, sawfish-xmms Suggests: gxmms2, xmms2-plugin-alsa, xmms2-plugin-flac, xmms2-plugin-icemetaint, xmms2-plugin-id3v2, xmms2-plugin-mad, xmms2-plugin-mms, xmms2-plugin-modplug, xmms2-plugin-oss, xmms2-plugin-vorbis, xmms2-plugin-wma Priority: optional Section: personal Filename: pool/main/c/cal-desktop/cal-desktop_2.0_all.deb Size: 3464 SHA256: c2b9a9c5b486d63f1e3fb74dfa773df1d95fd5d684bffa1fe6e15a586847699f SHA1: b049a6be415a742effbcd8422de0d475658052f9 MD5sum: 1339432b3946ebbd8c96712502fdfcc8 Description: Programas importantes para um desktop ou multi-utilizador. * tp-core - programas que devem existir em todas as máquinas . * tp-admin - programas que ajudam administrar uma máquina . * tp-emacs - pacotes que melhoram em muito o emacs . * tp-srv-emacs - pacotes simples para companhar o emacs . * tp-net - pacotes essenciais para gerir e diagnosticar uma rede IPv4 . * tp-net6 - pacotes essenciais para gerir e diagnosticar uma rede IPv6 . * apticron - faz download e informa acerca dos updates pendentes . * stress - programa para carregar uma máquina para testes e que por si só realiza alguns testes . * sawfish - gestor de janelas poderos e costumizável. . * sawfish-merlin-ugliness - extras muito comuns com outros gestores de janelas e desktops. . * theme-converters - converte um thema de gtk ou qt de .tar.gz em .deb . * sawfish-xmms - controla o xmms através do sawfish . * tcpdump - sniffer the rede muito popular . * tethereal - versão modo de texto do sniffer ethereal . * vlan - utilitarios para a gestão de vlans . * geg - desenha os gráficos 2D de equações matemáticas como por exemplo f(x) = 3 + sin(x) . * gringotts - gere ficheiros cifrados . * gnumeric - folha de calculo compatível com o Excel(r) . * mswordview - conunto de programas para visualizar documentos do MS Office(tm) . * xmms - excelente player de musica e muito simples, mas poderoso . * bmpx - alternativa ao xmms . * audacious - alternativa ao xmms . * xmms2 - reimplementação com uma abordagem diferente do xmms . * xmms-skins - skins para o xmms . * xtv - visualiza um X11 remoto numa janela local Package: cal-net Version: 1.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Suggests: net-tools, ethtool, w3m, ethereal | wireshark, tethereal | tshark, tcpdump, iptraf, prips, tcpick, tcptraceroute, traceproto, icmpush, nictools-pci, nictools-nopci, mii-diag, mtr, netdiag, arping | iputils-arping, nmap, fwbuilder, dlint, dnsdoctor, dnswalk, nslint, zonecheck, pkstat, nemesis, lanmap Priority: optional Section: personal Filename: pool/main/c/cal-net/cal-net_1.0_all.deb Size: 2962 SHA256: 8bb442a0064a1b6de4add6b747286cb3018d41e99800cec400e800bbe8374a3d SHA1: a4f71066f9950f323b74d2e019903d6f5dfc1b0e MD5sum: 315a2eb7c476b9c95c8a79a52b2b2275 Description: Utilitários uteis para utilizar a rede Sugere * net-tools - Software importante para gerir a rede * arping - Uma forma alternativa de fazer ping. * dlint, dnsdoctor, dnswalk, nslint, zonecheck - programas para * ethereal - Snifer gráfico * ethtool - Software para o transceiver duma placa ethernet. * fwbuilder - Interface grafica para construir regras de firewall. * icmpush - Gera packotes icmp a escolha * iptraf - Snifer e analise de desempenho das interfces de rede. * mii-diag - Software para o transceiver duma placa ethernet. * netdiag - Ferramentas para ajudar a diagnosticar a rede. * nictools-nopci - Ferramentes de diagnostico e configuracao de placas de rede naopci * nictools-pci - Ferramentas de diagnostico e configuracao de placas de rede pci * nmap - Network scanner, muito importante * pktstat - calcula e mostra a velocidade do tráfego por conecção em * potion - Top para fluxos de rede * prips - Imprime os IPs dum dado range. * tcpdump - Snifer classico. * tcpick - Snifer de fluxos tcp * tcptraceroute - traceroute para ligacoes tcp * tethereal - Versão do ethereal para modo de texto. * traceproto - traceroute para ICMP, TCP e UDP * nemesis - gera pacotes de qualquer tipo de protocolo, util para ser usado em scripts. * w3m - Browser poderoso em modo de texto * lanmap - escuta o tráfego de rede e gera um mapa 2D da topologia Package: cal-scripts Version: 0.51 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 325 Pre-Depends: dpkg (>= 1.16.12) Depends: fping, bc, liblockfile1, gawk, dash, util-linux | schedutils, perl, ntpdate, mail-transport-agent | exim4, lsb-base (>= 3.0-6) Recommends: python (>= 2.3), python-ldap Suggests: python2.3, python2.3-ldap, expect, liblockfile-dev Priority: optional Section: admin Filename: pool/main/c/cal-scripts/cal-scripts_0.51_all.deb Size: 79278 SHA256: 64e315d7d5de4520a89360be51c4842b7070fc82f2c60bb561b5c40974b2b815 SHA1: 8a457d9d2d2780bf4938634bafa13b8cf7417b90 MD5sum: caf6e4552c09d20b8250aa616b23cf1d Description: Scripts que ajudam a gerir e a manter uma maquina Linux . checkspace.sh - Verifica se as directorias criticas tem espaço livre suficiente. . firewall - Init.d script para lançar e para a firewall . slapdbackup - Faz backup de um servidor slapd . slapdcheck - Verifica se o servidor ldap está a correr e tenta recuperar o servidor em caso de erro . pgbackup - Realiza o backup das base de dados do postgres . tar-snapshot-edit - utility from GNU to change the device number inside listed-incremental files used by tar. Needed because device numbers can change between reboots. . Instala um crontab para realizar diversas tarefas de manutenção periodicamente Package: dsi-admin Version: 0.3 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: logcheck, apt-listchanges, apticron, bootlogd, fail2ban, checksecurity, smartmontools, libterm-readline-gnu-perl, fbset, ntp, hdparm, sdparm, blktool, screen, cal-scripts, stress, uptimed, procps, vlan, mdadm, xfsprogs, xfsdump, schedutils | util-linux (>= 2.12), sysstat, ipmitool | tp-na-sparc, itop, iotop, lsof, iperf Recommends: memtest86+, tp-backup-client Suggests: popularity-contest, screentest, apt-file, apt-rdepends, ud Priority: optional Section: dsi Filename: pool/main/d/dsi-admin/dsi-admin_0.3_all.deb Size: 2726 SHA256: 063f1cef35b1dc8ae27dc81c55b91f922fbabea7a2269d1b074c029c7118e4ca SHA1: 7d986958d228cb1342e6421a4413693f745cd4e6 MD5sum: 909de626c5d180e875c641faa22b950f Description: utilities for managing a computer at DSI This metapackage selects a group of utilities very usefull for managing a computer at DSI. Programs deprecated: * apt-file - funcionalidade disponivel online . * apt-rdepends - funcionalidade disponivel no aptitutde . * apt-listbugs - causa problemas no upgrade de squeeze para wheezy e a funcionalidade não é muito útil na practica. Package: dsi-chef Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Conflicts: libjson-ruby (>= 1.7.0) Homepage: Priority: extra Section: dsi Filename: pool/main/d/dsi-chef/dsi-chef_0.3_all.deb Size: 3830 SHA256: 9abe60798b245983ffdb772e8be3a5c4c10dc086b58261c209f305b6a720385a SHA1: bc4c770b71c4082c17dc7eeb6ce33a4f69cf93e2 MD5sum: e7ac0279d51c3eba66dbe7cba33e93d0 Description: Fix dependencies of chef for wheezy Chef for wheezy have wrong dependencies, this is a workaround. Package: dsi-conf-nrpe Version: 0.9 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 67 Depends: sudo Conflicts: tp-conf-srv (<= 0.73) Homepage: http://blog.calhariz.com Priority: extra Section: dsi Filename: pool/main/d/dsi-conf-nrpe/dsi-conf-nrpe_0.9_all.deb Size: 5048 SHA256: b2c974fe850d075890fda34094477e848490bdc9461de1fad40e17f3bb238203 SHA1: dc0abeed03b24b67815ac74f244abe5997515648 MD5sum: 1ad5ba5acc157a9e8a9a57065673ff78 Description: Configures the nrpe server for DSI Files and configurator for nagios-nrpe-server to be used at DSI. Package: dsi-core Version: 1.6 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Pre-Depends: debsums Depends: openssh-client, openssh-server, openssh-blacklist, openssl-blacklist, rsync, bzip2, lzop, dsi-srv-emacs, vim, vim-doc, joe, strace, mcelog | tp-na-sparc, apt-listchanges, slocate | mlocate, dlocate, logcheck, xauth | xbase-clients, gpm, w3m, w3m-img, ncftp, cfv, sux, sudo, less, unzip, debconf-utils, ncdu, tree, subversion, git, procps, vlan, mdadm, xfsprogs, xfsdump, lvm2, cal-logcheck-database, resolvconf, popularity-contest, bind9-host, reportbug, uptimed, pbbuttonsd | acpi | pmud-utils | tp-acpi-none, pbbuttonsd | acpid | pmud | tp-acpi-none, pbbuttonsd | acpi-support-base | pmud | tp-acpi-none, fdutils | tp-na-rpi, mtools, pciutils, usbutils, parted, htop, hwinfo, tp-ca-certificates, pwgen, debian-goodies Recommends: bash-completion, read-edid Suggests: tp-linux-2.6 | tp-linux-afs-2.6, ud, diskscan, apt-listbugs | tp-na-rpi Provides: tp-core Priority: Important Section: dsi Filename: pool/main/d/dsi-core/dsi-core_1.6_all.deb Size: 4186 SHA256: cb3b9a886d74e06f169330cebbc07bbaefa8873916b601e523c85789d3927952 SHA1: ad8e3ff8fa052d3aa22330e5909f6f1b991ddf04 MD5sum: 00a72f1b11c90950337df7ec0c2eea45 Description: utilitarios nucleares num sistema Un*x no Taguspark Depende ssh, rsync, bzip2, emacs21, emacs21-el, vim, vim-doc, joe, modconf, apt-listbugs, apt-listchanges, slocate, dlocate, logcheck, xbase-clients, gpm, w3m, cfv, cal-logcheck-database, less, unzip, debconf-utils, fdutils, mtools, usbutils . * openssh-client - Cliente ssh para login remote e proteccao da password . * openssh-server - Server ssh para login remote e proteccao da password . * openssh-blacklist* - lista de chaves RSA e DSA blacklisted . * rsync - Para transferencia optimizada de ficheiros . * bzip2 - Compressor alternativo utilizado pelas sources do linux. . * emacs - Algumas pessoas nao passam sem o emacs . * vim - Outras sem o vi . * joe - outros acreditam no joe . * modconf - Para gestao dos modulos do kernel . * strace - assinala as chamadas de sistema que um programa faz . * apt-listbugs - Saiba quais os bugs antes de instalar o software . * apt-listchanges - Saiba quais as alteracoes antes de instalar o software . * slocate - Um locate que sabe o que sao permissoes de ficheiros . * mlocate - Outro locate, mas mais rapido do que o slocate . * dlocate - Uma forma mais eficiente de saber qual o pacote responsavel por um ficheiros . * logcheck - Para se saber o que acontece de importante nos logs . * xauth - Programa para gerir a autenticação em X e permite que o ssh possa redirecionar o X11 display. . * xbase-clients - Contem o xauth que gera a autenticacao em X e permite que o ssh possa redirecionar o X11 display. . * gpm - Cut & Paste com o rato na consola de texto. . * w3m - Substituto mais poderoso do lynx, browser em modo de texto. . * ncftp - Um ftp melhor, pena que não suporte ssl. . * cfv - Programa util para gerar e calcular CRCs de ficheiros, suporta MD5. . * htop - um top mais top que o top. . * cal-logcheck-database - Reduz as mensagens de aviso do logcheck. . * less - less is more ;) . * unzip - Para instalar tomcat e companhia. . * debconf-utils - Para poder criar ficheiros de preseed . * alsa-modules - Para ter som usando com os novos drivers, julgo que estes são SMP safe. . * subversion - sistema de controlo de versões, para ajudar a manter os ficheiros ou a configuração do computador sobre controlo. . * git - sistema de controlo de versões distribuido, famoso por ser usado pelos developers do kernel de Linux. . * resolvconf - automatiza a gestão do ficheiro resolv.conf. . * popularity-contest - para ajudar a perceber quantas máquinas estão actualizadas com os novos pacotes. . * bind9-host - host distribuido com o bind v9, tem capacidades ligeiramente diferentes do host tradicional. . * reportbug - para enviar relatórios de bugs para a Debian . * acpid - interceptar o evento do botão de desligar é importante, para fazer shutdown a um servidor. . * acpi - tool para ver o estado acpi do hardware. . * fdutils - Utilitários para gerir as disquetes. . * mtools - Utilitários para manipular disquetes de DOS. . * usbutils - Utilitários para observar o bus USB. . * htop - um top mais top que o top. Package: dsi-core-cf Version: 1.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Pre-Depends: debsums Depends: openssh-client, openssh-server, openssh-blacklist, openssl-blacklist, rsync, bzip2, lzop, emacs23 | emacs22 | emacs, emacs23-el | emacs22-el | emacs21-el, vim, vim-doc, joe, strace, slocate | mlocate, dlocate, logcheck, xauth | xbase-clients, gpm, w3m, w3m-img, ncftp, cfv, sux, sudo, less, unzip, debconf-utils, subversion, git, lvm2, cal-logcheck-database, popularity-contest, bind9-host, reportbug, uptimed, fdutils, mtools, pciutils, usbutils, parted, htop, hwinfo, tp-ca-certificates, debian-goodies Recommends: bash-completion, read-edid, apt-listbugs, apt-listchanges Suggests: tp-linux-2.6 | tp-linux-afs-2.6, ud, modconf Priority: Optional Section: dsi Filename: pool/main/d/dsi-core-cf/dsi-core-cf_1.1_all.deb Size: 2810 SHA256: 4210914c798414d00f04b3eec029d1b61a7e908b89c9bdc14d44151fec029ccb SHA1: 947a2816c6a686ec9d3a6933f4c2ccb2b2505617 MD5sum: be868d3371f021d1eca12bbd34623f60 Description: core utilites for a computer managed by chef at DSI This meta-package depends on a group of utilities usefull for the system administrators and users. Package: dsi-hard-9xxx Source: tp-hard-3ware Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 37 Depends: 3dm2, tw-cli, tw-update, tw-firmware-9xxx Priority: extra Section: dsi Filename: pool/main/t/tp-hard-3ware/dsi-hard-9xxx_0.3_all.deb Size: 2854 SHA256: 72f6aa19dd1b0190fae18a6165aa3e2373353b674fbefdb1b4358a3f17bb174a SHA1: 77e291ddae8dcac334fd0939518a394945165394 MD5sum: 9cb717d68ebbb5ed43885398469528ed Description: recomended software for models 9xxx from 3ware Install software useful with controllers 9xxx from 3ware. Package: dsi-logcheck-database Version: 0.1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 423 Priority: optional Section: admin Filename: pool/main/d/dsi-logcheck-database/dsi-logcheck-database_0.1_all.deb Size: 62312 SHA256: fbfc1ffa0349342a45b0c75640a2629f87d8ef28b4ebb2af6149bfcbb89cb4ec SHA1: 93ff11e85cb4c55566be4510b621137636d3f2ad MD5sum: be3337624fe668f1c8bc111d8f88e8f1 Description: extra database of system rules for log checker Ignore less dangerous messages and give examples on how to build personalized rules for the local requirements. . Ignore less dangerous messages from smartmontools. . Ignore connections from authorized amanda server, cacti and nagios. . Extra rules that are not well fitted to be in logcheck-database. Package: dsi-nagios-plugins Source: tp-nagios-plugins Version: 0.5-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 162 Depends: nagios-plugins-basic Suggests: tw-cli, smartmontools, python (>= 2.3), python-ldap, expect, storcli Replaces: tp-nagios-plugins Provides: tp-nagios-plugins Priority: optional Section: dsi Filename: pool/main/t/tp-nagios-plugins/dsi-nagios-plugins_0.5-1_all.deb Size: 33976 SHA256: 375a5f9b4b9630a19b0153739038c2ed74df7110af4d1ebcd4f06ab3de701bb8 SHA1: 66eabbe2352364f2bec714e5503f235493edfe94 MD5sum: 7d3bda45d9729b997b386937d9edb8c9 Description: Plugins for the nagios system that are used in DSI Nagios is a host/service/network monitoring and management system. . This package provides the suite of plugins that are most likely to be useful on a central nagios host on DSI. Package: dsi-net Version: 0.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: iptables, iputils-ping, net-tools, traceroute, bind9-host, arping | iputils-arping, ipcalc, prips, iputils-tracepath, tcptraceroute, vlan, netcat, iptraf, ifstat, iftop, iproute, wireshark | ethereal, tshark | tethereal, tcpdump, tcpick, dsniff, nmap, ipmitool | tp-na-sparc, ethtool Recommends: potion Suggests: cal-net, cal-net-audit, fwbuilder, nemesis Replaces: tp-net Provides: tp-net Priority: optional Section: dsi Filename: pool/main/d/dsi-net/dsi-net_0.1_all.deb Size: 3098 SHA256: 7561cd3bddfb936e3b8f1210478eced6d5dc3386a707b9e02f9170df6686abce SHA1: 6856635c5dda90dc0c0d58d094499da31754af60 MD5sum: 2bb1d4359864ba572bb2e23094d8c79e Description: Utilities usefull to use and diagnose an IPv4 network Here you will find sugestions and recomends for programs to use and diagnose an IPv4 network. . * iptables - to manage the Linux firewall . * iputils-ping - ping with suport for IPv4 and IPv6 . * net-tools - many utils important to manage the network . * traceroute - tradicional traceroute . * bind9-host - host command from bind9 . * arping - a ping command that can query by MAC address . * ipcalc - calculator for IPv4 address . * prips - imprime ranges de IPs, util em scripts . * iputils-tracepath - find the sortest MTU on IPv4 and IPv6 versions . * tcptraceroute - traceroute using TCP connections, very useful to find proxys . * vlan - manage vlans on the phisical interfaces . * netcat - cat para a rede . * iptraf - contador de tráfego em tempo real. . * ifstat - contador de tráfego em tempo real. . * iftop - contador de tráfego por host em tempo real. . * potion - contador de tráfego por host em tempo real. . * iproute - ip command to manage the network on Linux kernel. . * wireshark - sniffer de rede, antigo ethereal . * tshark - ethereal em modo de texto, antigo tethereal . * tcpdump - tradicional programa e captura de tráfego . * tcpink - programa de capatura de conecções TCP . * dsniff - gera e escuta diversos tipos de tráfego . * nmap - port scanner . * fwbuilder - Gerador de regras de firewall com interface gráfica GNOME . * ipmitool - para configuracao e monitorizacao via hardware ipmi, permite a manipulacao de hardware ipmi local e via remota. . * nemesis - gerador de pacotes de qualquer protocolo para humanos Package: dsi-server Version: 1.5 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 26 Depends: dsi-core | dsi-core-cf, dsi-net, dsi-admin, dsi-srv-util | dsi-srv-util-cf Recommends: intel-microcode, amd64-microcode Replaces: tp-server Provides: tp-server Priority: optional Section: dsi Filename: pool/main/d/dsi-server/dsi-server_1.5_all.deb Size: 2212 SHA256: fd664ce5cc626f5fa357d046f2bf6edbc4ffae274a381ff07b051b60f08bc7e7 SHA1: e49180799cffbdf7e8aa1740725026aa70a5e007 MD5sum: 6d9c0523b9cd08839e514b9ef9604d84 Description: utilities for servers at DSI This meta-package install all extra the utilities for a server at DSI. Package: dsi-srv-emacs Version: 0.2 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: emacs24-nox | emacs24 | emacs23 | emacs | emacs23-nox | emacs23-lucid, emacs-goodies-el, muse-el, planner-el, remember-el, python-mode, post-el, debian-el, ispell, iamerican, wamerican Recommends: emacs23-el, emacs23-common-non-dfsg Provides: tp-srv-emacs Priority: optional Section: dsi Filename: pool/main/d/dsi-srv-emacs/dsi-srv-emacs_0.2_all.deb Size: 2568 SHA256: 54add9eb70f0f31bd7c6e913b9d9a8511c390014e8f5e4f22aa55cd0fb2077be SHA1: 6d326c77b78c59e97f74ba3371a310229ee37985 MD5sum: beca65f2d5a91f594ee1b2ff54479663 Description: Software útil para acompanhar o emacs em servidores. * emacs-wiki - sistema tipo wiki para organizar informacao dentro do emacs . * planner-el - sistema de planeamente de tarefas e calendario para o emacs . * python-mode - modo python para emacs . * remember-el - permite guardar notas em qualquer momento para relembrar depois. . * post-el - modo para editar mails. . * debian-el - modos para editar ficheiros de configuração de um sistema Debian . * ispell - "speller" de palavras . * iamerican - suporte de americano para o ispell . * iportuguese - suporte de português para o ispell . * wamerican - lista de palavras segundo a grafia americana para o ispell . * wportuguese - lista de palavras portuguesas para o ispell Package: dsi-srv-util Version: 0.2 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: ncftp, fortunes, fortune-mod, fortunes-min, fortunes-debian-hints, fortunes-mario, gpm, mutt, procmail, rar | unrar, arj, unzip, zoo, zip, sharutils, nrg2iso, memtester, procinfo, tofrodos, uptimed, ispell, iportuguese, wportuguese, iamerican, wamerican, resolvconf, eject, popularity-contest, genisoimage Recommends: lha Suggests: apt-move, ud Replaces: tp-srv-util Provides: tp-srv-util Priority: extra Section: dsi Filename: pool/main/d/dsi-srv-util/dsi-srv-util_0.2_all.deb Size: 2634 SHA256: 5d5aea50467eed229ae77f2a2c7ad7654e2be3115cce6b2fc80972fbe893b0d0 SHA1: 912c43050207a56791acd667f2a6e69f98c0276b MD5sum: ea94bfa945d6ee3d044a537736300bb9 Description: utilities recommended on servers at DSI Um conjunto de software que podem ser muito util nos servidores . * sharutils - shar, unshar, uuencode, uudecode . * procinfo - Displays system information from /proc . * tofrodos - Converts DOS <-> Unix text files, alias tofromdos . * genisoimage - cria imagens iso9660, indicado para CDs e DVDs Package: dsi-srv-util-cf Version: 0.1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: ncftp, fortunes, fortune-mod, fortunes-min, fortunes-debian-hints, fortunes-mario, gpm, mutt, procmail, rar | unrar, arj, unzip, zoo, zip, sharutils, nrg2iso, memtester, procinfo, tofrodos, uptimed, ispell, iportuguese, wportuguese, iamerican, wamerican, eject, popularity-contest, genisoimage Recommends: lha Suggests: apt-move, ud Replaces: tp-srv-util Provides: tp-srv-util Priority: extra Section: dsi Filename: pool/main/d/dsi-srv-util-cf/dsi-srv-util-cf_0.1_all.deb Size: 2622 SHA256: 8826581cd4dfb7913f9fbed9d58fe3d2d29b283f5cfd8e92c4f4c7eae7b71056 SHA1: ab89a5ef6947555e0fa8723e92e81f557d3e76b0 MD5sum: 657a0fd1f64edfda7568cd8611655c3a Description: utilities recommended on servers at DSI Um conjunto de software que podem ser muito util nos servidores . * sharutils - shar, unshar, uuencode, uudecode . * procinfo - Displays system information from /proc . * tofrodos - Converts DOS <-> Unix text files, alias tofromdos . * genisoimage - cria imagens iso9660, indicado para CDs e DVDs Package: dsi-task2-nrpe-srv Source: dsi-task-nagios Version: 0.4 Architecture: all Maintainer: Jose Calhariz Installed-Size: 29 Pre-Depends: dsi-conf-nrpe (>= 0.7) Depends: nagios-nrpe-server, tp-nagios-plugins (>= 0.8) Homepage: http://blog.calhariz.com Priority: extra Section: dsi Filename: pool/main/d/dsi-task-nagios/dsi-task2-nrpe-srv_0.4_all.deb Size: 3848 SHA256: 83144f89e81a1798dc9852374bb00cfb8b3c182e91aa84867c0869d3945c3307 SHA1: de377fe529fcd3b966c46eb4253dba88a853b5bb MD5sum: f9c1e7420b51df2feaa6e837bd6f9171 Description: Software needed to run nrpe-server at DSI. Depends on all the software to run an advanced client of nagios. This clients need an nrpe-server to run more advanced plugins on the client. Package: dsi-web Version: 0.3 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: w3m, w3m-img, links2, mozilla-firefox | iceweasel, iceweasel-l10n-pt-pt, iceweasel-l10n-pt-br, icedove, icedove-gcontactsync, icedove-l10n-pt-pt, icedove-l10n-pt-br, enigmail | mozilla-thunderbird-enigmail, gsfonts-x11 Recommends: tp-flash-marillat | tp-flash-debian | tp-na-alpha | tp-na-powerpc | tp-na-sparc, icedove-l10n-es-es, icedove-l10n-it, icedove-l10n-sv-se, icedove-l10n-tr, iceweasel-l10n-el, iceweasel-l10n-es-es, iceweasel-l10n-it, iceweasel-l10n-sv-se, iceweasel-l10n-tr, google-chrome-stable | chromium-browser Suggests: mozilla-plugin-vlc Priority: optional Section: dsi Filename: pool/main/d/dsi-web/dsi-web_0.3_all.deb Size: 2704 SHA256: d45e3f78b75b05b6566f72f7807271e105d78aca12628315d09a2dc9319b6710 SHA1: 5c0acd8b1bc7ad94af1ca3f5dab6ec6239825c4e MD5sum: 810440b223bfa5e63bd108e9ed339c38 Description: pacotes interessantes de web para o Taguspark. w3m - Browser de web em modo de texto, permite também ver ficheiros locais de html. . links2 - Browser de web em modo de texto . mozilla - agora é iceape . firefox - agora é iceweasel . thunderbird - agora é icedove . mozilla-helix-player, mozilla-mplayer, mozilla-plugin-vlc, kaffeine-mozilla - vários plugins para tocar ficheiros multimedia dentro do browser . flashplugin-nonfree - instalador do plugin de flash Package: elasticsearch Version: 1.0.0.Beta2-1 Architecture: amd64 Maintainer: Andreas Wirooks Installed-Size: 19939 Depends: adduser, openjdk-7-jre-headless | openjdk-7-jre Homepage: http://www.elasticsearch.org Priority: optional Section: web Filename: pool/main/e/elasticsearch/elasticsearch_1.0.0.Beta2-1_amd64.deb Size: 17947658 SHA256: 186445daebc4e432688bce39200a3a495951e30c8809fa7fba4c9e9db88eff49 SHA1: 7449c161244fa1029a1b45477aa01b1f0235e673 MD5sum: 7875cf264d22f93f3383b481df2ca55c Description: Open Source, Distributed, RESTful Search Engine ElasticSearch is a distributed RESTful search engine built for the cloud. . Features include: . + Distributed and Highly Available Search Engine. - Each index is fully sharded with a configurable number of shards. - Each shard can have one or more replicas. - Read / Search operations performed on either one of the replica shard. + Multi Tenant with Multi Types. - Support for more than one index. - Support for more than one type per index. - Index level configuration (number of shards, index storage, ...). + Various set of APIs - HTTP RESTful API - Native Java API. - All APIs perform automatic node operation rerouting. + Document oriented - No need for upfront schema definition. - Schema can be defined per type for customization of the indexing process. + Reliable, Asynchronous Write Behind for long term persistency. + (Near) Real Time Search. + Built on top of Lucene - Each shard is a fully functional Lucene index - All the power of Lucene easily exposed through simple configuration/plugins. + Per operation consistency - Single document level operations are atomic, consistent, isolated and durable. + Open Source under Apache 2 License. Package: kibana Version: 3.0.0milestone4-1 Architecture: all Maintainer: Andreas Wirooks Installed-Size: 4436 Depends: apache2 | nginx Homepage: http://www.elasticsearch.org Priority: optional Section: web Filename: pool/main/k/kibana/kibana_3.0.0milestone4-1_all.deb Size: 1154834 SHA256: 25159f941e93b9b74c51d5f161ee562c930d30ec79ab3348cae12a5d3be66859 SHA1: 151a485dc023a348b90aeee19283c44e34f21a9b MD5sum: 8872d064625dc88ed2e320a858cc4db7 Description: Visualize logs and time-stamped data Visualize logs and time-stamped data Package: libafsauthent1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 521 Depends: libafsrpc1 (>= 1.6.5), libc6 (>= 2.11), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libafsauthent1_1.6.5-1~bpo70+1_amd64.deb Size: 202618 SHA256: 86c08d8f71d581522b8258ee46df20676bce9848ca3713166a2282ccb75aa621 SHA1: addceb82ca8cbf20ea584398f80cfc167cafe6c8 MD5sum: 6c1c9b1ec3ca4ef393b3520587ea671a Description: AFS distributed file system runtime library (authentication) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing AFS client authentication and token management. Package: libafsrpc1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 422 Depends: libc6 (>= 2.4) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libafsrpc1_1.6.5-1~bpo70+1_amd64.deb Size: 191992 SHA256: 4354e49e3064b8d3913ce73294a6e59cb8e9b6515dfc925d3e514db94f08360f SHA1: 5a66af5d430827e2175e2aa0f96607c8979b6ae4 MD5sum: 6bbf691c2ccfcc989eeb4a1398070460 Description: AFS distributed file system runtime library (RPC layer) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing the Rx protocol and other AFS RPC functionality. Package: libkopenafs1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 104 Depends: libc6 (>= 2.2.5) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libkopenafs1_1.6.5-1~bpo70+1_amd64.deb Size: 84774 SHA256: 70405337beb1c68f70dadf0bf5b005d345a10ac7ea4c73d71ccfefcf58ba7e4a SHA1: a54040b044c375038f17334456595cb732ad1a13 MD5sum: 9866ab5613275883938f38ade850148c Description: AFS distributed file system runtime library (PAGs) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing an interface to manipulating AFS process authentication groups (PAGs). It provides the a subset of the interface provided by the Heimdal libkafs library. Package: libopenafs-dev Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 12001 Depends: libc6 (>= 2.4), libafsauthent1 (= 1.6.5-1~bpo70+1), libafsrpc1 (= 1.6.5-1~bpo70+1), libkopenafs1 (= 1.6.5-1~bpo70+1) Suggests: openafs-doc Conflicts: arla-dev, liblwp-dev Homepage: http://www.openafs.org/ Priority: extra Section: libdevel Filename: pool/main/o/openafs/libopenafs-dev_1.6.5-1~bpo70+1_amd64.deb Size: 1270994 SHA256: 3541dcfe5392e5aff189204a2fbdf623fec1aa3590b7ae25b13e065959a046f3 SHA1: 71381ff0bd280be3180e2a3a4df64a4b9560e6d1 MD5sum: ae3b4b8303b23a0c1db6349e1aa5a497 Description: AFS distributed filesystem development libraries AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides static development libraries and headers needed to compile AFS applications. Package: libpam-openafs-kaserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 946 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), openafs-client (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: admin Filename: pool/main/o/openafs/libpam-openafs-kaserver_1.6.5-1~bpo70+1_amd64.deb Size: 266138 SHA256: cde657cceb0b442a3c54577bacc7443ae99f2110e7983c224e51b02b33f1a49b SHA1: dabc7cf26c6cc56b6614a1aaf0594dd9d1e4ef67 MD5sum: f61469bbb76c890d572a11d9b5025086 Description: AFS distributed filesystem kaserver PAM module AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides a PAM module for existing sites using the AFS kaserver for authentication. New sites should use a Kerberos v5 implementation, a Kerberos v5 PAM module such as libpam-krb5, and libpam-afs-session. Package: openafs-client Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 8160 Depends: libc6 (>= 2.11), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.10+dfsg~), libncurses5 (>= 5.5-5~), libtinfo5, debconf (>= 0.5) | debconf-2.0 Recommends: lsof, openafs-modules-dkms (>= 1.6.5-1~bpo70+1) | openafs-modules-source (>= 1.6.5-1~bpo70+1) | openafs-modules3 Suggests: openafs-doc, openafs-krb5 Conflicts: arla Breaks: openafs-modules1, openafs-modules2 Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-client_1.6.5-1~bpo70+1_amd64.deb Size: 1966760 SHA256: e09161855b3da94c08632c879baec087871a37294e82cf33fb1c0dd5efe9a398 SHA1: 030340b58885ac42f272e4f1ff893f2710179585 MD5sum: eae71e1f8a8b9d7e6ac86df823c0e7eb Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Package: openafs-dbg Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 25542 Depends: openafs-fileserver (= 1.6.5-1~bpo70+1) | openafs-dbserver (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: debug Filename: pool/main/o/openafs/openafs-dbg_1.6.5-1~bpo70+1_amd64.deb Size: 22623518 SHA256: 7cec665f57a538429feeb09e467f284eeba8fe6d1e38e69ad6e7b9eb75296672 SHA1: b425ba879517d118fe2120cc2bf809ff0f22e54f MD5sum: 68967da80e1f5c0645086af9c7b3c0bd Description: AFS distributed filesystem debugging information AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the debugging information for the OpenAFS server binaries (the openafs-fileserver and openafs-dbserver packages). Package: openafs-dbserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 1782 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), perl, openafs-fileserver Recommends: openafs-client Suggests: openafs-doc Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-dbserver_1.6.5-1~bpo70+1_amd64.deb Size: 454838 SHA256: 4c040451b8d9c9fc61aaae9a94064bd6d74c4231886357a0083145b19f04d60c SHA1: ce5c65481a24f9b115a1bf7f05fc7e3c21a8aefb MD5sum: a461fefc5e8a5dc4a33568ad93e8d989 Description: AFS distributed filesystem database server AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides AFS database server binaries. It should be installed on the servers that will act as volume location and protection servers. Package: openafs-doc Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 11115 Recommends: libjs-jquery Homepage: http://www.openafs.org/ Priority: optional Section: doc Filename: pool/main/o/openafs/openafs-doc_1.6.5-1~bpo70+1_all.deb Size: 3988806 SHA256: 0f8f6207d21afe17d219d9decb84e77fa35be1ba2f56fa7ac67898697c59b27e SHA1: 7caaae3a3cc289a124a9a74cb3315ed404849a88 MD5sum: bbfeb344ed32f3565b7cd7a1f02c851e Description: AFS distributed filesystem documentation AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the OpenAFS user's and reference manuals, some protocol documentation, and other OpenAFS documentation. Package: openafs-fileserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 7165 Depends: libc6 (>= 2.10), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), debconf (>= 0.5) | debconf-2.0, lsb-base, openafs-client Recommends: ntp | time-daemon Suggests: openafs-doc Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-fileserver_1.6.5-1~bpo70+1_amd64.deb Size: 1291844 SHA256: 1f387f20b5c741be81cb7bbef3e11d0d0ce792dbc13a0a6e01997b3f0b6d8c6a SHA1: 634aef872b614c19823b893fc24917ff641fa7a1 MD5sum: 0bc867cc14ec654e45ed240afdc2a649 Description: AFS distributed filesystem file server AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the AFS fileserver binaries. It should be installed on any machine that will export files into AFS. Package: openafs-fuse Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 913 Depends: libc6 (>= 2.4), libfuse2 (>= 2.8.1), openafs-client (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: net Filename: pool/main/o/openafs/openafs-fuse_1.6.5-1~bpo70+1_amd64.deb Size: 367146 SHA256: 0b99cd04d8cb94adbe3c645ea2e1ee43c1be5f7e75f0b8a8362f5b0a943e0d88 SHA1: b689101948c70d04ef8bc1eebf7874d1ed9f228a MD5sum: 9a2f679dc2c5011de7937a1071ec4994 Description: AFS distributed file system experimental FUSE client AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides an experimental FUSE implementation of the AFS client as afsd.fuse. This currently only provides read-only access to AFS, doesn't work with all of the normal AFS client programs, and must be started manually, but may be of interest in situations where read-only access is sufficient and the kernel module cannot be built. Package: openafs-kpasswd Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 737 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), openafs-client (= 1.6.5-1~bpo70+1) Conflicts: heimdal-clients, kerberos4kth-clients, krb5-user Homepage: http://www.openafs.org/ Priority: extra Section: net Filename: pool/main/o/openafs/openafs-kpasswd_1.6.5-1~bpo70+1_amd64.deb Size: 283992 SHA256: 67b987baafa81470a5fe9eb1f32722d7278f019fc0f5e80b4f806dd6b5388bd0 SHA1: 6249e87329145f750a7d6e74b3cd55d7306bed50 MD5sum: 44207077fbff58fa2539dd17c6a9676b Description: AFS distributed filesystem old password changing AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides kpasswd and kas, utilities needed by the OpenAFS kaserver to create users and change passwords. Only install this package if you are already using kaserver; generally you should not install this package for new cells or for cells using Kerberos v5. Package: openafs-krb5 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: amd64 Maintainer: Russ Allbery Installed-Size: 797 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.10+dfsg~) Breaks: openafs-client (<< 1.4.7.dfsg1-1) Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-krb5_1.6.5-1~bpo70+1_amd64.deb Size: 256050 SHA256: af19ef36d3bee16d2e5c53bbed9c142cba88282ce5d4814df6014fb5047b8113 SHA1: 37deb2ba6d723bb7bc079a86a3467ca9f9d4f541 MD5sum: 2e0c32604a78b510967da1c9f083e269 Description: AFS distributed filesystem Kerberos 5 integration AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides aklog, a utility for authenticating to AFS using Kerberos 5. It also provides asetkey, a utility to set AFS server keys from a Kerberos keytab, and ka-forwarder, a utility to forward kaserver requests to a KDC using fakeka. Package: openafs-modules-dkms Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 5975 Depends: dkms (>= 2.1.0.0), perl, libc6-dev Recommends: openafs-client (>= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: kernel Filename: pool/main/o/openafs/openafs-modules-dkms_1.6.5-1~bpo70+1_all.deb Size: 925022 SHA256: ed2e30f6e91ee13090b924ae337e78d8aec7c4b3f1280ccd8a4ffcce287322c9 SHA1: dc45ce1d075ae29faba682ce8828e0639dec1c58 MD5sum: bfc2ff57afd89d96307f55b45a134b9f Description: AFS distributed filesystem kernel module DKMS source AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the source for the AFS kernel module, packaged with appropriate configuration for DKMS to build new modules dynamically. Package: openafs-modules-source Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 1135 Depends: debhelper (>= 8), module-assistant | kernel-package, perl Recommends: openafs-client (>= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: kernel Filename: pool/main/o/openafs/openafs-modules-source_1.6.5-1~bpo70+1_all.deb Size: 1121456 SHA256: 85fb4df97392bb1737dc1a0cfbef39b7ea4ec30f72038b50cc528c09da733981 SHA1: 910fbc91b8871ab3be7f2dfad35ce72a00da87b4 MD5sum: b3a38838cbee2bd15fb182ff1eb374dc Description: AFS distributed filesystem kernel module source AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the source to the AFS kernel module in a form suitable for use by module-assistant or kernel-package. Package: switchconf Version: 0.0.13-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 104 Depends: lsb-base (>= 3.0-6), liblockfile1 Priority: optional Section: admin Filename: pool/main/s/switchconf/switchconf_0.0.13-1_all.deb Size: 11476 SHA256: b7ee7cd0274c5ee47940fcb71da084d2e9df557940823a45fe7e5b0c63b93731 SHA1: 16eee359dc281b4a24738de6fb82d4b1a429b674 MD5sum: 3990f3b51d893b04d153edfc310fc0ef Description: switch between system configuration sets Switchconf allows users to easily change their system's settings, choosing between the possible configurations for different environments. . Most switchconf users are laptop owners who want to change their network settings according to where they currently are - but there are many cases for non mobile systems to desire to choose between configuration sets. . Switchconf is a very simple script that takes its arguments from the command line. It allows you to maintain different sets of configurations, installing the desired set of configuration when called with its name as an argument, and execute a pre-specified set of commands before and after the switch. Package: sysinfoupdate Version: 0.10.0-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 95 Depends: parted Recommends: pciutils, usbutils, hdparm, net-tools, kmod, procps Suggests: sdparm, hwinfo, ipmitool, iproute, ntp, smartmontools, hpadu, hpacucli, hp-health, hponcfg, read-edid, storcli Homepage: http://blog.calhariz.com Priority: extra Section: admin Filename: pool/main/s/sysinfoupdate/sysinfoupdate_0.10.0-1_all.deb Size: 16156 SHA256: 9b72e15887dd1d8d112a6b789360ef20a94f86bfcb351569691da9ba0640b180 SHA1: 8e8e6da86955bd67e17a550e91767fe6728e3fd2 MD5sum: b1ac7db059e4c54e4c6ef0bfac036151 Description: Collects information about the system This information will be help full to track changes made to a system. Changes made by the system administrator or by the installation of new software, upgrades, security updates, or other changes. It's a script that collects information useful to maintain a diary or for bare bones recovery from backups. Package: tp-admin Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 36 Depends: dsi-admin Priority: optional Section: dsi Filename: pool/main/t/tp-admin/tp-admin_2.0_all.deb Size: 2080 SHA256: f7723717a96c0842313f64f2b7ba72ebf476f7e585c497edf4cb53a50ea03461 SHA1: be100b5ed90c3c8d9f1152c1a8279596a253a12b MD5sum: cea56d214c1a31c50b7721dac852f8db Description: transitional package to dsi-admin This is a transitional package to facilitate the upgrade to the new name dsi-admin. It can be safely removed after the upgrade. Package: tp-aklog Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 35 Depends: openafs-krb5 (>= 1.4) Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-aklog_0.10_all.deb Size: 4178 SHA256: 7e90283d43785daab86dff4f4a6cbabf22755036f347104afb7393c37654e980 SHA1: 3bc9fd02489a3b1442b460fa197a27e746c9007b MD5sum: a8144a00e51d7d32e3d161b497596703 Description: personalized aklog to be used in IST This aklog is personalized to work arouns some limitations in the original aklog from openafs-krb5 Package: tp-conf-afs-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 39 Depends: gawk Enhances: tp-task2-afs-heimdal-client, tp-task2-afs-mit-client Replaces: tp-conf-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-conf-afs-client_0.10_all.deb Size: 4808 SHA256: f2fc47bcb1c702ef758372a1f0b72159ee14bc9bb93a1d8ce0593880442d6adb SHA1: 53ec056df3632112ab3721f67fa96bb3a8369e20 MD5sum: c2a6b038ec10aa9d436e22f543207fb1 Description: configure openafs and kerberos for use in IST Configure the kerberos and the openafs to be a client of openafs in Instituto Superior Tecnico. You can choose to access the files in Taguspark or in IST-Alameda. You can use it even if you don't have an afs client installed. . Run tp-conf-openafs-config to change the default cell. You don't need to have an account, but you may to talk to CIIST to get one. Package: tp-conf-afs-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 35 Depends: gawk Recommends: tp-conf-afs-client, tp-conf-libnss-ldap, tp-conf-libpam-ldap Enhances: tp-task2-afs-heimdal-login, tp-task2-afs-mit-login Replaces: tp-conf-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-conf-afs-login_0.10_all.deb Size: 4172 SHA256: 5ce06f4a9b6e762f1b2ac5247a65bb838c75d96b2e9ca852f1264028387fe00b SHA1: 7a77c1d80c64b07b260a230eb288cb71580c2999 MD5sum: 57461f2b40da7cde74998657550c43b9 Description: configure centralized login on Taguspark Configure the kerberos and the openafs to be a client of openafs in Instituto Superior Tecnico. . Run tp-conf-openafs-config to change the default cell. If don't need to have an account, but you may to talk to CIIST to get one. Package: tp-conf-hostname Version: 0.7 Architecture: all Maintainer: Jose Calhariz Installed-Size: 39 Depends: net-tools, bind9-host, hostname (>= 2.13) Conflicts: tp-hostname Priority: optional Section: taguspark Filename: pool/main/t/tp-conf-hostname/tp-conf-hostname_0.7_all.deb Size: 4772 SHA256: 59c3077b8fb2669b2fa35ed5fa3fa6458cd494d4137d94db6da3d464ea8219f3 SHA1: 8cfc3f9815b987b3b0436fbd18c86000d25f5b96 MD5sum: 6e4e1d7a53d29cfcc46c9fe01bf2d3bd Description: Detecta e configura no arranque o nome da maquina Apenas tem utilidade nos laboratários do Taguspark sobre gestão do CIIST-TP. Ou seja, não quer instalar este pacote a menos para fazer investigação sobre pacotes Debian. Package: tp-conf-ldap-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 67 Depends: ucf, tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal, tp-task2-ldap-srv Recommends: openssl, gnutls-bin Conflicts: slapd (<= 2.4) Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-conf-ldap-srv_0.12_all.deb Size: 6272 SHA256: 69bd351f62dc56f70e6f36cfaa1448033cc26a198f9b6fde3af49ea8aca5ea43 SHA1: bb5867f3a4e1b3140fc50068e03bfe2faa1f2795 MD5sum: c4fced1321a223bb934b5537c4551219 Description: configure the ldap server for Taguspark Contains a config files and a script to configure the ldap server to authenticate users to the kerberos realm. . Don't forget to configure correctly your Kerberos instalation. Package: tp-conf-sasl2-cyrus Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 32 Depends: tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-conf-sasl2-cyrus_0.12_all.deb Size: 3692 SHA256: 5a592866d9a52a634850526f6502222defdc350b64956254571b75024604d0c2 SHA1: d6f71c71575acd8bfd8a3cf58225da19814d24f1 MD5sum: 6d421743afd68ea5df80830a41933bb3 Description: configura saslauthd da Cyrus para Kerberos5/GSSAPI Experimental . Configura minimamente o saslauthd para o mecanismo kerberos. . Nao se esqueça de ter o Kerberos bem configurado. Package: tp-conf-srv Version: 0.80 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 576 Depends: dpatch, dpkg-dev, gcc | c-compiler, make | build-essential Recommends: logrotate (>= 3.7.1) Suggests: tp-conf-ldap-client Conflicts: tp-srv-conf (<< 0.25) Priority: optional Section: dsi Filename: pool/main/t/tp-conf-srv/tp-conf-srv_0.80_all.deb Size: 87538 SHA256: edbd45242e311d6a0f1a0df9ebdf26d601bd62063eb48af443541ee7b51b861e SHA1: a0689acb60b6e81190fafc12875cb689af648f90 MD5sum: e61f650d19ae03b761068000eb0b995e Description: scripts and patches to configure a server Includes patches and scripts to automatically configure a machine like a tipical server. . Patch and script to configure tripwire. Package: tp-core Version: 3.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-core Priority: optional Section: dsi Filename: pool/main/t/tp-core/tp-core_3.0_all.deb Size: 2082 SHA256: a4b773b70fa48de86d5643fb0d1a6b04195e1a3db88392419e020537be30433a SHA1: 7a7be4cac991e2ee251626f4f723a16f7bd612d4 MD5sum: 9f56ccc26ce3ebce50d1bcace540efc8 Description: transitional package to dsi-core This is a transitional package to facilitate the upgrade to the new name dsi-core. It can be safely removed after the upgrade. Package: tp-hard-9xxx Source: tp-hard-3ware Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 28 Depends: dsi-hard-9xxx Priority: extra Section: dsi Filename: pool/main/t/tp-hard-3ware/tp-hard-9xxx_0.3_all.deb Size: 2624 SHA256: 249fc400c761794e97b46cb3614ea703deb6df326315e22e223258f7e8dcdeef SHA1: ffb2ade5f13d46cd2a750d1266a79f48c50b5eea MD5sum: 46bb1f4d1d8adf3eef53305b5ad060ae Description: transitional package to dsi-hard-9xxx This is a transitional package to facilitate the upgrade to the new name dsi-hard-9xxx. It can be safely removed after the upgrade. Package: tp-nagios-plugins Version: 0.9-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 174 Depends: nagios-plugins-basic, sudo Suggests: tw-cli, smartmontools, python (>= 2.3), python-ldap, expect, storcli Priority: optional Section: dsi Filename: pool/main/t/tp-nagios-plugins/tp-nagios-plugins_0.9-1_all.deb Size: 36162 SHA256: 500bc6a8423e2f1c6a8fdb0be8e657ad827f52d53885d8a8037580378e5ea6c8 SHA1: f566cb67d0e294288641cf984349c002a227d84a MD5sum: 3d1cc4083ffa3b71696ad5da0f5b780b Description: Plugins for the nagios system that are used in DSI Nagios is a host/service/network monitoring and management system. . This package provides the suite of plugins that are most likely to be useful on a central nagios host on DSI. Package: tp-net Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-net Priority: optional Section: dsi Filename: pool/main/t/tp-net/tp-net_2.0_all.deb Size: 2072 SHA256: 4ffb758d0c450cdf509277be9dd1123a60dfc050b074fe603f5bf87af77303a8 SHA1: 7ac166430fb1c2eda893037be13c6d0a624fd76d MD5sum: 639b176b8e694eb33d1a990eb6fb9b59 Description: transitional package to dsi-net This is a transitional package to facilitate the upgrade to the new name dsi-net. It can be safely removed after the upgrade. Package: tp-srv-emacs Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-srv-emacs Priority: optional Section: dsi Filename: pool/main/t/tp-srv-emacs/tp-srv-emacs_2.0_all.deb Size: 2088 SHA256: 8f25b516a8ebf5671f2b3d67217820a5eefa319874c69f258bf57afa3ad11b04 SHA1: 379c4dcdf6e09dd1f6f940b6bf647ee94f2fc215 MD5sum: d4f0e10c2962d476c07f27c252c4bbaf Description: transitional package to dsi-srv-emacs This is a transitional package to facilitate the upgrade to the new name dsi-srv-emacs. It can be safely removed after the upgrade. Package: tp-srv-util Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-srv-util Priority: optional Section: dsi Filename: pool/main/t/tp-srv-util/tp-srv-util_2.0_all.deb Size: 2090 SHA256: a4b9671d06a5637ec93ead469d5be9e3051f0cb0271b1d9cbac9d08ef1c085ea SHA1: 49bcac440e237abef6808bc05dd81e4ccda7afc0 MD5sum: f66ccc0936ef64379734324866ba5233 Description: transitional package to dsi-srv-util This is a transitional package to facilitate the upgrade to the new name dsi-srv-util. It can be safely removed after the upgrade. Package: tp-task2-afs-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: tp-task2-afs-heimdal-client | tp-task2-afs-mit-client Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-client_0.10_all.deb Size: 3374 SHA256: 71c05eae3b94ca9cee791a01f8a3089909b00af6e1f08c938bb15c9af5a1f196 SHA1: 3629de7fc68faede4a538a4d10a77aaa3a9cb736 MD5sum: cc35ef75500c17cc9c17a606fb9fa209 Description: software to be client of openafs Software needed to be a client of openafs, to authenticate you need to choose between kerberos client from Heimdal or MIT. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-heimdal-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: heimdal-clients, openafs-client Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs, tp-task-openafs-heimdal Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-heimdal-client_0.10_all.deb Size: 3388 SHA256: 51558df85fd97a8c7885aacdb1bf7e48c00ce5846d2c463751447f75cec0217c SHA1: 908f0eec4cce26efdc46752d9c6b23f82f7c7aad MD5sum: 0274a3aaaa9ebc4b663f04e7fb3fc5d7 Description: software to be a client of openafs and kerberos of Heimdal Software needed to be a cliente of openafs using Heimdal implementation of Kerberos 5. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-heimdal-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: heimdal-clients, openafs-client, tp-conf-afs-client, tp-conf-afs-login, tp-aklog, libnss-ldapd | libnss-ldap, libpam-ldapd | libpam-ldap, libpam-heimdal, openafs-krb5, libpam-afs-session Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs-log, tp-task-openafs-login-heimdal Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-heimdal-login_0.10_all.deb Size: 3704 SHA256: 322507aa62864a9b63f9ed61860365517eb29012570c0e0adefdc53e20d4ca88 SHA1: 6ebce00bb35c7e5558b9a9ce913371a603d63b77 MD5sum: 1c9ff04b6fb6d4f1498a8c3aec208a24 Description: login using Kerberos Heimdal, LDAP and OpenAFS Software needed to login using Kerberos passwords, information users from LDAP and home directory in OpenAFS directories. More commonly named integrated login. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . Auto configure is not yet available, use this information on this Wiki page https://ciist.ist.utl.pt/ciwiki/LoginIntegradoNaDebianSargeTagus . Description of packages: . * heimdal-clients - kerberos clients from Heimdal . * openafs-client - openafs client to access openafs file . * libnss-ldap - add support for ldap method to nsswitch.conf . * libpam-ldap - ldap module for pam . * libpam-krb5 - kerberos module for pam . * openafs-krb5 - aklog program, not really needed . * libpam-afs-session - openafs-session module from pam, needed to get afs tokens. Package: tp-task2-afs-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: tp-task2-afs-heimdal-login | tp-task2-afs-mit-login Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-login_0.10_all.deb Size: 3392 SHA256: c07bf4efa0155c53636dcadb7bfc84ee88b7867a18579c79fdc6db5a7bb7bc0f SHA1: c71a910635fc87e8e0f1195b302426e497753f74 MD5sum: e2f849933fbb67d096b89cf96c2fa71b Description: software to configure login for homedir in AFS Software needed for your homedir to be placed in AFS, to authenticate you need to choose between kerberos client from Heimdal or MIT. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-mit-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: krb5-user, openafs-client, openafs-krb5 Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-mit-client_0.10_all.deb Size: 3400 SHA256: 7f9b129e5f2d5e7a77fb37ecea2fe7555074224ac42c6566af048c8ca68a5890 SHA1: 252fe591b2e0e7586f09281d0c7487ac157c6359 MD5sum: 31a817f5ac88f4b8304f15f82bae9cb8 Description: software to be a client of openafs and kerberos of MIT Software needed to be a cliente of openafs using MIT implementation of Kerberos 5. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software run tp-conf-openafs-config or to change the defalt cell. Package: tp-task2-afs-mit-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: krb5-user, openafs-client, tp-conf-afs-client, tp-conf-afs-login, tp-aklog, libnss-ldapd | libnss-ldap, libpam-ldapd | libpam-ldap, libpam-krb5, openafs-krb5, libpam-afs-session Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-mit-login_0.10_all.deb Size: 3682 SHA256: 33a6be6387689734cddd57f4d3f827d2e76b7bf40ff8878890790122a0ad2abd SHA1: af09b454257c10de3c1ede90e3e93567286ae41b MD5sum: 27f73078233a625a3bc32fb12391b44d Description: login using MIT Kerberos, LDAP and OpenAFS Software needed to login using Kerberos passwords, information users from LDAP and home directory in OpenAFS directories. More commonly named integrated login. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . Auto configure is not yet available, use this information on this Wiki page https://ciist.ist.utl.pt/ciwiki/LoginIntegradoNaDebianSargeTagus . Description of packages: . * krb5-user - kerberos clients from MIT . * openafs-client - openafs client to access openafs file . * libnss-ldap - add support for ldap method to nsswitch.conf . * libpam-ldap - ldap module for pam . * libpam-krb5 - kerberos module for pam . * openafs-krb5 - aklog program . * libpam-afs-session - openafs-session module from pam, needed to get afs tokens. Package: tp-task2-ldap-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: slapd, tp-ca-certificates, tp-conf-ldap-client, tp-conf-ldap-srv, db4.2-util, ldap-utils Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-ldap-srv_0.12_all.deb Size: 2864 SHA256: cac17c4d7172f7cada4a0732c5d2c41bffc9d8ed6d53b4e933180bf07206d9d5 SHA1: 162fec8cdde52f0a97be739db0f0b79b8eebcafa MD5sum: 502428628b3b6e79071fa84b00ca73fe Description: select ldap server from Open LDAP Package: tp-task2-sasl2-cyrus-clt Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-clt_0.12_all.deb Size: 3068 SHA256: d822cd1327cdabc7aaab4a02d5d3e439e4d2f2f83a762cbb5214a28076ca7d7f SHA1: 79cf8093570d7b7b4f176dd74b68c43677bb01de MD5sum: f0ccb6768bbc119193b2cdba419943bf Description: sasl2 from cyrus to handle autentications for clients Install libraries and configurator to enable the client side of the sals2 autentications using Kerberos5/GSSAPI. . This permits to use client software of services that use sasl2 to autenticate users. Package: tp-task2-sasl2-cyrus-heimdal Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: libsasl2-modules-gssapi-heimdal, heimdal-clients, tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-heimdal_0.12_all.deb Size: 2970 SHA256: f10583d2efc5cb9831bf7bc9c2cc8eeebe0e55bcb768704464c6470fd539aa62 SHA1: 67bb555727f003c88ec203b47b2c239191e78d81 MD5sum: 9882389d8a5fa204844cb0fd112a283d Description: sasl2 Kerberos5/GSSAPI using Heimdal implementation Seleciona o software e os configuradores para instalar um servidor de salsauthd a fazer autenticação GSSAPI ou Kerberos5 . Usa a implementação da Cyrus do SASL2. . Usa a implementação Heimdal do Kerberos. Package: tp-task2-sasl2-cyrus-mit Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: libsasl2-modules-gssapi-mit | libsasl2-gssapi-mit, krb5-user, tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-mit_0.12_all.deb Size: 2978 SHA256: 6af0270791b7261bf4f4bf49194aec97daa7cbbe947c939e58bfe03fd5b3acf6 SHA1: df36129f4b3ab5f0736773ddad2da9001db6bf4f MD5sum: a923ebea719f4f7fbecd3bc01fc52c70 Description: sasl2 Kerberos5/GSSAPI using MIT implementation . Seleciona o software e os configuradores para instalar um servidor de salsauthd a fazer autenticação GSSAPI ou Kerberos5 . Usa a implementação da Cyrus do SASL2. . Usa a implementação Heimdal do Kerberos. Package: tp-task2-sasl2-cyrus-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: sasl2-bin, tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-srv_0.12_all.deb Size: 2952 SHA256: 2a056ae29db9459bc227578954f54fffef5a7d9921cba32b07ef1d4b965edb51 SHA1: 48bd9ff2b260bf1041d3189aa368dc2484f707b9 MD5sum: b2fee3072f9b9fb99b29d5589595072d Description: sasl2 from cyrus to handle autentications for servers Install libraries and configurator to enable the server side of the sals2 autentications using Kerberos5/GSSAPI . This permits to enable the sasl2 support on server side, for services that want to use that to authenticate users. Package: tp-web Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-web Priority: optional Section: dsi Filename: pool/main/t/tp-web/tp-web_2.0_all.deb Size: 2076 SHA256: 9a2788eecec1abc6cba375a09781dcc0518bc0994cf59a054fcb0b742500e225 SHA1: 6ef4864dc3086b46ee96699f5f4a6fd715d78dfc MD5sum: e333aaebf9c2cc6a331a63bddaeedaf4 Description: transitional package to dsi-web This is a transitional package to facilitate the upgrade to the new name dsi-web. It can be safely removed after the upgrade. Package: tp-x11 Version: 3.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: xorg, xserver-xorg, xserver-xorg-video-all, mdetect, mesa-utils, xterm, icedax | cdda2wav, cdparanoia Recommends: read-edid, xcdroast, xresprobe Suggests: xv Priority: optional Section: dsi Filename: pool/main/t/tp-x11/tp-x11_3.1_all.deb Size: 2376 SHA256: 109b656aa32cd3a3f4313a448b4914d97a5d6635f2a167e26e2c87681a85843f SHA1: fade9c527bbdeb614e8c32ab955aa17ee1f40626 MD5sum: bd33b73cb04dde70d1374736574ffb94 Description: Pacotes de X11 . xterm - Apesar de antigo ainda é um dos melhores emuladores de terminais. . xv - Um classico na visualizacao e manipulacao de imagens . xresprobe - realiza uma sonda DDC aos monitores e LCDs para descobrir as resoluções suportadas. Temporariamente indesponivel Package: zabbix-agent Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 791 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), debconf (>= 0.5) | debconf-2.0, adduser, ucf, lsb-base Suggests: logrotate Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-agent_2.4.0-1+wheezy_amd64.deb Size: 422676 SHA256: b2e090109f92cdf488ee41025aec2d86d80be4acd782c1767b3a3fff68cb4fba SHA1: 99b1d548bce2c85e5cebb8fd350a5b6414420e7d MD5sum: 2a5d09499985910718d0b4e1c7123d9e Description: network monitoring solution - agent Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to monitor a host using a Zabbix agent. Package: zabbix-frontend-php Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: all Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 26475 Depends: debconf (>= 0.5) | debconf-2.0, apache2 | httpd, php5, php5-mysql | php5-pgsql, php5-gd, ucf, dbconfig-common (>= 1.8.19), ttf-dejavu-core | ttf-japanese-gothic Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-frontend-php_2.4.0-1+wheezy_all.deb Size: 5914652 SHA256: 359718b369a35e257df08678d54e1190e415717de52112e4c426f3b57ea9acd2 SHA1: 6c3a885b620e87a6468afb80e71e24fe49e75cd5 MD5sum: 0e4b4813e942b67010a02e932f4fe6cd Description: network monitoring solution - PHP front-end Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides a web-browsable front-end to the Zabbix server, which can display graphs of the data collected from clients. Package: zabbix-get Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 281 Depends: libc6 (>= 2.7) Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-get_2.4.0-1+wheezy_amd64.deb Size: 205478 SHA256: 099a97855925d68b0f4807664c223965589dd6a3b80e810d8301e9e77f034b61 SHA1: ced5eb3a3f7b3f7d7784191c625eecbb9cd487de MD5sum: 82ff3f98ee0cd54de82e6b6b53e68fc7 Description: network monitoring solution - get Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the command line utility needed to get data from agent. Package: zabbix-java-gateway Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 835 Depends: java6-runtime-headless | java7-runtime-headless, adduser Suggests: logrotate Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-java-gateway_2.4.0-1+wheezy_amd64.deb Size: 719966 SHA256: 261c0969f5dfcac6b0adcafa85b38efd0427d5d96f53683065444e01c3909473 SHA1: a6c62047af417d34e0795d53279f4de13a1bd2ee MD5sum: 6cf5d60f78f919e829b203d3a4e0bc6f Description: network monitoring solution - java-gateway Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to monitor a Java application using a Zabbix Java gateway. It collects information from JMX agent. Package: zabbix-proxy-mysql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1690 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libmysqlclient18 (>= 5.5.24+dfsg-1), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, mysql-client | virtual-mysql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: mysql-server (>= 4.0.16-2) Suggests: logrotate Conflicts: zabbix-proxy-pgsql, zabbix-proxy-sqite3 Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-mysql_2.4.0-1+wheezy_amd64.deb Size: 590004 SHA256: ce133ef226afae688ac0e32e21c91ac32950fe72ec672b787540bc57681f7fc3 SHA1: c1f95e29056907c80f7d10054363904fff548dc0 MD5sum: eecac65f75dde15d16eac0eec4534210 Description: network monitoring solution - proxy (using MySQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in a MySQL database and then passes it to a Zabbix server. Package: zabbix-proxy-pgsql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1685 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libpq5, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, postgresql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: postgresql Suggests: logrotate Conflicts: zabbix-proxy-mysql, zabbix-proxy-sqlite3 Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-pgsql_2.4.0-1+wheezy_amd64.deb Size: 590906 SHA256: dde3dc9182a8acc007bedc6106edf31dd066ca7b6923c26a65a39f7812b41ace SHA1: c9a8e7343bbbf1c5ffbfcfbb0159998a12de84f3 MD5sum: 7f20e173ac952c7a81b1c31610117400 Description: network monitoring solution - proxy (using PostgreSQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in a PostgreSQL database and then passes it to a Zabbix server. Package: zabbix-proxy-sqlite3 Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1661 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libsqlite3-0 (>= 3.5.9), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, sqlite3, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Suggests: logrotate Conflicts: zabbix-proxy-mysql, zabbix-proxy-pgsql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-sqlite3_2.4.0-1+wheezy_amd64.deb Size: 577582 SHA256: 45010ef443f37a4b8154d878127456a7ed536689d365824235b7807de3960e49 SHA1: ea9d927b29d7f99e602f9c8bd4037a6c28d1aebc MD5sum: bbf1ad84adf65c67ebbabe989d90c5f2 Description: network monitoring solution - proxy (using SQLite3) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in an SQLite3 database and then passes it to a Zabbix server. Package: zabbix-sender Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 302 Depends: libc6 (>= 2.7) Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-sender_2.4.0-1+wheezy_amd64.deb Size: 215590 SHA256: 3934a87e32aacdcd2328e9d911520dffdcc93f3f8e76d4550ba4f0b5220bf9cf SHA1: 620ca17e9e971c4f179f97a320fb7c402f6f24c9 MD5sum: 629316aab18cbcb74c8cc069b3561cea Description: network monitoring solution - sender Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the command line utility needed to send data to Zabbix server or Zabix proxy. Package: zabbix-server-mysql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 7541 Pre-Depends: debconf Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libiksemel3, libldap-2.4-2 (>= 2.4.7), libmysqlclient18 (>= 5.5.24+dfsg-1), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, mysql-client | virtual-mysql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: mysql-server (>= 4.0.16-2), snmpd, snmptt Suggests: zabbix-frontend-php, logrotate Conflicts: zabbix-server-pgsql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-server-mysql_2.4.0-1+wheezy_amd64.deb Size: 2914892 SHA256: c97db016deae95a8fcadc76e7bc15b8a675b557b0efa8faa660c7aacd943ed8e SHA1: ef17a1014b6a9f0bf9522745576e47fa58924cc4 MD5sum: 1e5fe0a051d76a0a5c618aeff9edb72c Description: network monitoring solution - server (using MySQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix client. It collects information from Zabbix clients and stores it in a MySQL database. Package: zabbix-server-pgsql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: amd64 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 7357 Pre-Depends: debconf Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libiksemel3, libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libpq5, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, postgresql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: postgresql, snmpd, snmptt Suggests: zabbix-frontend-php, logrotate Conflicts: zabbix-server-mysql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-server-pgsql_2.4.0-1+wheezy_amd64.deb Size: 2914736 SHA256: 963e23363d90d5ebf9cb48f44cd3de3b8e3f3c8cc8865100da43bbd23d546233 SHA1: 4a012c4100ae9b2d7c9cfb0d74d0d6b79d004eea MD5sum: 97f25438b5722e8a42b5780250b7eb70 Description: network monitoring solution - server (using PostgreSQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix client. It collects information from Zabbix clients and stores it in a PostgreSQL database.