Package: amanda-client Source: amanda Version: 1:3.3.5-1 Architecture: i386 Maintainer: Jose M Calhariz Installed-Size: 811 Depends: libc6 (>= 2.4), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.28.0), libreadline6 (>= 6.0), libssl1.0.0 (>= 1.0.0), amanda-common (= 1:3.3.5-1) Suggests: gnuplot, dump, smbclient Conflicts: amanda Breaks: amanda-common (<< 1:2.5.2p1-3) Replaces: amanda-common (<< 1:2.5.2p1-3) Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-client_3.3.5-1_i386.deb Size: 280734 SHA256: 2f49a895c4a3998f48508f252f5988e0e74feec0b0fd6139bdf77c8c7bf43183 SHA1: bd8204b0c469301093802c5ac79bf0d8f7f9de2c MD5sum: 6268f69c2b3324ebcef0ed1477e63de5 Description: Advanced Maryland Automatic Network Disk Archiver (Client) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . THIS PACKAGE RELIES ON A RUNNING AMANDA SERVER IN YOUR NETWORK. . For important notes, see /usr/share/doc/amanda-client/README.Debian. . Explanation of suggested programs: - gnuplot is needed for plotting statistics of backups Package: amanda-common Source: amanda Version: 1:3.3.5-1 Architecture: i386 Maintainer: Jose M Calhariz Installed-Size: 6558 Depends: debconf (>= 0.5) | debconf-2.0, perl (>= 5.14.2-21+deb7u1), perlapi-5.14.2, libc6 (>= 2.7), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.31.8), libssl1.0.0 (>= 1.0.0), update-inetd, tar (>= 1.12), perl5, bsd-mailx | mailx, adduser, openbsd-inetd | inet-superserver Suggests: amanda-server (= 1:3.3.5-1) | amanda-client (= 1:3.3.5-1) Conflicts: amanda Replaces: amanda, amanda-client Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-common_3.3.5-1_i386.deb Size: 2365982 SHA256: 62326b98e51986765cc19219ea0846c46fe0464b741bac7551a336a24f3c7ad2 SHA1: ba2ac3845e41208ab1eea4b1f388c3c05c750cb9 MD5sum: fd6059ff3a95e2a0b8fee54758feed5f Description: Advanced Maryland Automatic Network Disk Archiver (Libs) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . This package contains libraries and other required files that are shared between the amanda-client and amanda-server packages Package: amanda-server Source: amanda Version: 1:3.3.5-1 Architecture: i386 Maintainer: Jose M Calhariz Installed-Size: 913 Depends: libc6 (>= 2.4), libcurl3 (>= 7.16.2), libglib2.0-0 (>= 2.28.0), libssl1.0.0 (>= 1.0.0), amanda-common (= 1:3.3.5-1), bsd-mailx | mailx Suggests: perl5, gnuplot, amanda-client (= 1:3.3.5-1), cpio | mt-st Conflicts: amanda Breaks: amanda-common (<< 1:2.5.2p1-3) Replaces: amanda-common (<< 1:2.5.2p1-3) Homepage: http://www.amanda.org Priority: optional Section: utils Filename: pool/main/a/amanda/amanda-server_3.3.5-1_i386.deb Size: 355894 SHA256: e35d7d165909e308c1ce97b776548ca3af7431fcd2c747ac98b411bef7486cb9 SHA1: f6c49a1b160fea6add4ffeb49f8d154546f1fa5a MD5sum: 51c12bb0cf8dee3592482330c135dc9c Description: Advanced Maryland Automatic Network Disk Archiver (Server) Amanda is a backup system designed to archive many computers on a network to a single large-capacity tape drive. This package is suitable for large amounts of data to backup. For smaller solutions take a look at afbackup, tob, ... . Features: * will back up multiple machines in parallel to a holding disk, blasting finished dumps one by one to tape as fast as files can be written to tape. For example, a ~2 Gb 8mm tape on a ~240K/s interface to a host with a large holding disk can be filled by Amanda in under 4 hours. * built on top of standard backup software: Unix dump/restore, and later GNU Tar and others. * does simple tape management: will not overwrite the wrong tape. * supports tape changers via a generic interface. Easily customizable to any type of tape carousel, robot, or stacker that can be controlled via the unix command line. * for a restore, tells you what tapes you need, and finds the proper backup image on the tape for you. * recovers gracefully from errors, including down or hung machines. * reports results, including all errors in detail, in email to operators. * will dynamically adjust backup schedule to keep within constraints: no more juggling by hand when adding disks and computers to network. * includes a pre-run checker program, that conducts sanity checks on both the tape server host and all the client hosts (in parallel), and will send an e-mail report of any problems that could cause the backups to fail. * can compress dumps before sending or after sending over the net, with either compress or gzip. * can optionally synchronize with external backups, for those large timesharing computers where you want to do full dumps when the system is down in single-user mode (since BSD dump is not reliable on active filesystems): Amanda will still do your daily dumps. * lots of other options; Amanda is very configurable. . For important notes, see /usr/share/doc/amanda-server/README.Debian. . Explanation of suggested programs: - perl is needed for some non essential server utilities - gnuplot is needed for plotting statistics of backups - to backup the tape server, you need to install the client too Package: awesant Version: 0.13-3 Architecture: all Maintainer: Jonny Schulz Installed-Size: 202 Depends: liblog-handler-perl (>= 0.75), libparams-validate-perl, libjson-perl, libclass-accessor-perl, libsys-hostname-long-perl Suggests: libio-socket-ssl-perl Homepage: http://www.bloonix.de/ Priority: extra Section: net Filename: pool/main/a/awesant/awesant_0.13-3_all.deb Size: 52740 SHA256: 335376f3e5d02815aa1c1a046177a0435e315fddd56e78717b4630e65fc50a7a SHA1: 0178a35479bcc42e6681ab7bcf5d56bccdb3b990 MD5sum: 998b665c2327b93a2d10582b2c0fffa8 Description: awesant-agent Awesant is a log shipper for logstash. Package: cal-desktop Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: tp-desktop | dsi-desktop, tp-core, tp-admin, tp-comm, tp-emacs | tp-srv-emacs, tp-security | tp-security-min, tp-net, tp-net6, apticron, stress, signing-party, keyanalyze, sawfish, sawfish-merlin-ugliness, sawfish-themes, theme-converters | tp-na, tcpdump, ethereal | wireshark, tethereal | tshark, nvidia-settings | tp-na-powerpc | tp-na-alpha | tp-na-sparc, gnupg, geg, gringotts, gnumeric, wv | mswordview, xv, dia, rsibreak, xmms | audacious | bmpx | xmms2, xmms-skins | audacious | bmpx, xtv Recommends: xmms | bmpx | audacious-plugins, sawfish-xmms Suggests: gxmms2, xmms2-plugin-alsa, xmms2-plugin-flac, xmms2-plugin-icemetaint, xmms2-plugin-id3v2, xmms2-plugin-mad, xmms2-plugin-mms, xmms2-plugin-modplug, xmms2-plugin-oss, xmms2-plugin-vorbis, xmms2-plugin-wma Priority: optional Section: personal Filename: pool/main/c/cal-desktop/cal-desktop_2.0_all.deb Size: 3464 SHA256: c2b9a9c5b486d63f1e3fb74dfa773df1d95fd5d684bffa1fe6e15a586847699f SHA1: b049a6be415a742effbcd8422de0d475658052f9 MD5sum: 1339432b3946ebbd8c96712502fdfcc8 Description: Programas importantes para um desktop ou multi-utilizador. * tp-core - programas que devem existir em todas as máquinas . * tp-admin - programas que ajudam administrar uma máquina . * tp-emacs - pacotes que melhoram em muito o emacs . * tp-srv-emacs - pacotes simples para companhar o emacs . * tp-net - pacotes essenciais para gerir e diagnosticar uma rede IPv4 . * tp-net6 - pacotes essenciais para gerir e diagnosticar uma rede IPv6 . * apticron - faz download e informa acerca dos updates pendentes . * stress - programa para carregar uma máquina para testes e que por si só realiza alguns testes . * sawfish - gestor de janelas poderos e costumizável. . * sawfish-merlin-ugliness - extras muito comuns com outros gestores de janelas e desktops. . * theme-converters - converte um thema de gtk ou qt de .tar.gz em .deb . * sawfish-xmms - controla o xmms através do sawfish . * tcpdump - sniffer the rede muito popular . * tethereal - versão modo de texto do sniffer ethereal . * vlan - utilitarios para a gestão de vlans . * geg - desenha os gráficos 2D de equações matemáticas como por exemplo f(x) = 3 + sin(x) . * gringotts - gere ficheiros cifrados . * gnumeric - folha de calculo compatível com o Excel(r) . * mswordview - conunto de programas para visualizar documentos do MS Office(tm) . * xmms - excelente player de musica e muito simples, mas poderoso . * bmpx - alternativa ao xmms . * audacious - alternativa ao xmms . * xmms2 - reimplementação com uma abordagem diferente do xmms . * xmms-skins - skins para o xmms . * xtv - visualiza um X11 remoto numa janela local Package: cal-net Version: 1.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Suggests: net-tools, ethtool, w3m, ethereal | wireshark, tethereal | tshark, tcpdump, iptraf, prips, tcpick, tcptraceroute, traceproto, icmpush, nictools-pci, nictools-nopci, mii-diag, mtr, netdiag, arping | iputils-arping, nmap, fwbuilder, dlint, dnsdoctor, dnswalk, nslint, zonecheck, pkstat, nemesis, lanmap Priority: optional Section: personal Filename: pool/main/c/cal-net/cal-net_1.0_all.deb Size: 2962 SHA256: 8bb442a0064a1b6de4add6b747286cb3018d41e99800cec400e800bbe8374a3d SHA1: a4f71066f9950f323b74d2e019903d6f5dfc1b0e MD5sum: 315a2eb7c476b9c95c8a79a52b2b2275 Description: Utilitários uteis para utilizar a rede Sugere * net-tools - Software importante para gerir a rede * arping - Uma forma alternativa de fazer ping. * dlint, dnsdoctor, dnswalk, nslint, zonecheck - programas para * ethereal - Snifer gráfico * ethtool - Software para o transceiver duma placa ethernet. * fwbuilder - Interface grafica para construir regras de firewall. * icmpush - Gera packotes icmp a escolha * iptraf - Snifer e analise de desempenho das interfces de rede. * mii-diag - Software para o transceiver duma placa ethernet. * netdiag - Ferramentas para ajudar a diagnosticar a rede. * nictools-nopci - Ferramentes de diagnostico e configuracao de placas de rede naopci * nictools-pci - Ferramentas de diagnostico e configuracao de placas de rede pci * nmap - Network scanner, muito importante * pktstat - calcula e mostra a velocidade do tráfego por conecção em * potion - Top para fluxos de rede * prips - Imprime os IPs dum dado range. * tcpdump - Snifer classico. * tcpick - Snifer de fluxos tcp * tcptraceroute - traceroute para ligacoes tcp * tethereal - Versão do ethereal para modo de texto. * traceproto - traceroute para ICMP, TCP e UDP * nemesis - gera pacotes de qualquer tipo de protocolo, util para ser usado em scripts. * w3m - Browser poderoso em modo de texto * lanmap - escuta o tráfego de rede e gera um mapa 2D da topologia Package: cal-scripts Version: 0.51 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 325 Pre-Depends: dpkg (>= 1.16.12) Depends: fping, bc, liblockfile1, gawk, dash, util-linux | schedutils, perl, ntpdate, mail-transport-agent | exim4, lsb-base (>= 3.0-6) Recommends: python (>= 2.3), python-ldap Suggests: python2.3, python2.3-ldap, expect, liblockfile-dev Priority: optional Section: admin Filename: pool/main/c/cal-scripts/cal-scripts_0.51_all.deb Size: 79278 SHA256: 64e315d7d5de4520a89360be51c4842b7070fc82f2c60bb561b5c40974b2b815 SHA1: 8a457d9d2d2780bf4938634bafa13b8cf7417b90 MD5sum: caf6e4552c09d20b8250aa616b23cf1d Description: Scripts que ajudam a gerir e a manter uma maquina Linux . checkspace.sh - Verifica se as directorias criticas tem espaço livre suficiente. . firewall - Init.d script para lançar e para a firewall . slapdbackup - Faz backup de um servidor slapd . slapdcheck - Verifica se o servidor ldap está a correr e tenta recuperar o servidor em caso de erro . pgbackup - Realiza o backup das base de dados do postgres . tar-snapshot-edit - utility from GNU to change the device number inside listed-incremental files used by tar. Needed because device numbers can change between reboots. . Instala um crontab para realizar diversas tarefas de manutenção periodicamente Package: dsi-admin Version: 0.3 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: logcheck, apt-listchanges, apticron, bootlogd, fail2ban, checksecurity, smartmontools, libterm-readline-gnu-perl, fbset, ntp, hdparm, sdparm, blktool, screen, cal-scripts, stress, uptimed, procps, vlan, mdadm, xfsprogs, xfsdump, schedutils | util-linux (>= 2.12), sysstat, ipmitool | tp-na-sparc, itop, iotop, lsof, iperf Recommends: memtest86+, tp-backup-client Suggests: popularity-contest, screentest, apt-file, apt-rdepends, ud Priority: optional Section: dsi Filename: pool/main/d/dsi-admin/dsi-admin_0.3_all.deb Size: 2726 SHA256: 063f1cef35b1dc8ae27dc81c55b91f922fbabea7a2269d1b074c029c7118e4ca SHA1: 7d986958d228cb1342e6421a4413693f745cd4e6 MD5sum: 909de626c5d180e875c641faa22b950f Description: utilities for managing a computer at DSI This metapackage selects a group of utilities very usefull for managing a computer at DSI. Programs deprecated: * apt-file - funcionalidade disponivel online . * apt-rdepends - funcionalidade disponivel no aptitutde . * apt-listbugs - causa problemas no upgrade de squeeze para wheezy e a funcionalidade não é muito útil na practica. Package: dsi-chef Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Conflicts: libjson-ruby (>= 1.7.0) Homepage: Priority: extra Section: dsi Filename: pool/main/d/dsi-chef/dsi-chef_0.3_all.deb Size: 3830 SHA256: 9abe60798b245983ffdb772e8be3a5c4c10dc086b58261c209f305b6a720385a SHA1: bc4c770b71c4082c17dc7eeb6ce33a4f69cf93e2 MD5sum: e7ac0279d51c3eba66dbe7cba33e93d0 Description: Fix dependencies of chef for wheezy Chef for wheezy have wrong dependencies, this is a workaround. Package: dsi-conf-nrpe Version: 0.9 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 67 Depends: sudo Conflicts: tp-conf-srv (<= 0.73) Homepage: http://blog.calhariz.com Priority: extra Section: dsi Filename: pool/main/d/dsi-conf-nrpe/dsi-conf-nrpe_0.9_all.deb Size: 5048 SHA256: b2c974fe850d075890fda34094477e848490bdc9461de1fad40e17f3bb238203 SHA1: dc0abeed03b24b67815ac74f244abe5997515648 MD5sum: 1ad5ba5acc157a9e8a9a57065673ff78 Description: Configures the nrpe server for DSI Files and configurator for nagios-nrpe-server to be used at DSI. Package: dsi-core Version: 1.6 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Pre-Depends: debsums Depends: openssh-client, openssh-server, openssh-blacklist, openssl-blacklist, rsync, bzip2, lzop, dsi-srv-emacs, vim, vim-doc, joe, strace, mcelog | tp-na-sparc, apt-listchanges, slocate | mlocate, dlocate, logcheck, xauth | xbase-clients, gpm, w3m, w3m-img, ncftp, cfv, sux, sudo, less, unzip, debconf-utils, ncdu, tree, subversion, git, procps, vlan, mdadm, xfsprogs, xfsdump, lvm2, cal-logcheck-database, resolvconf, popularity-contest, bind9-host, reportbug, uptimed, pbbuttonsd | acpi | pmud-utils | tp-acpi-none, pbbuttonsd | acpid | pmud | tp-acpi-none, pbbuttonsd | acpi-support-base | pmud | tp-acpi-none, fdutils | tp-na-rpi, mtools, pciutils, usbutils, parted, htop, hwinfo, tp-ca-certificates, pwgen, debian-goodies Recommends: bash-completion, read-edid Suggests: tp-linux-2.6 | tp-linux-afs-2.6, ud, diskscan, apt-listbugs | tp-na-rpi Provides: tp-core Priority: Important Section: dsi Filename: pool/main/d/dsi-core/dsi-core_1.6_all.deb Size: 4186 SHA256: cb3b9a886d74e06f169330cebbc07bbaefa8873916b601e523c85789d3927952 SHA1: ad8e3ff8fa052d3aa22330e5909f6f1b991ddf04 MD5sum: 00a72f1b11c90950337df7ec0c2eea45 Description: utilitarios nucleares num sistema Un*x no Taguspark Depende ssh, rsync, bzip2, emacs21, emacs21-el, vim, vim-doc, joe, modconf, apt-listbugs, apt-listchanges, slocate, dlocate, logcheck, xbase-clients, gpm, w3m, cfv, cal-logcheck-database, less, unzip, debconf-utils, fdutils, mtools, usbutils . * openssh-client - Cliente ssh para login remote e proteccao da password . * openssh-server - Server ssh para login remote e proteccao da password . * openssh-blacklist* - lista de chaves RSA e DSA blacklisted . * rsync - Para transferencia optimizada de ficheiros . * bzip2 - Compressor alternativo utilizado pelas sources do linux. . * emacs - Algumas pessoas nao passam sem o emacs . * vim - Outras sem o vi . * joe - outros acreditam no joe . * modconf - Para gestao dos modulos do kernel . * strace - assinala as chamadas de sistema que um programa faz . * apt-listbugs - Saiba quais os bugs antes de instalar o software . * apt-listchanges - Saiba quais as alteracoes antes de instalar o software . * slocate - Um locate que sabe o que sao permissoes de ficheiros . * mlocate - Outro locate, mas mais rapido do que o slocate . * dlocate - Uma forma mais eficiente de saber qual o pacote responsavel por um ficheiros . * logcheck - Para se saber o que acontece de importante nos logs . * xauth - Programa para gerir a autenticação em X e permite que o ssh possa redirecionar o X11 display. . * xbase-clients - Contem o xauth que gera a autenticacao em X e permite que o ssh possa redirecionar o X11 display. . * gpm - Cut & Paste com o rato na consola de texto. . * w3m - Substituto mais poderoso do lynx, browser em modo de texto. . * ncftp - Um ftp melhor, pena que não suporte ssl. . * cfv - Programa util para gerar e calcular CRCs de ficheiros, suporta MD5. . * htop - um top mais top que o top. . * cal-logcheck-database - Reduz as mensagens de aviso do logcheck. . * less - less is more ;) . * unzip - Para instalar tomcat e companhia. . * debconf-utils - Para poder criar ficheiros de preseed . * alsa-modules - Para ter som usando com os novos drivers, julgo que estes são SMP safe. . * subversion - sistema de controlo de versões, para ajudar a manter os ficheiros ou a configuração do computador sobre controlo. . * git - sistema de controlo de versões distribuido, famoso por ser usado pelos developers do kernel de Linux. . * resolvconf - automatiza a gestão do ficheiro resolv.conf. . * popularity-contest - para ajudar a perceber quantas máquinas estão actualizadas com os novos pacotes. . * bind9-host - host distribuido com o bind v9, tem capacidades ligeiramente diferentes do host tradicional. . * reportbug - para enviar relatórios de bugs para a Debian . * acpid - interceptar o evento do botão de desligar é importante, para fazer shutdown a um servidor. . * acpi - tool para ver o estado acpi do hardware. . * fdutils - Utilitários para gerir as disquetes. . * mtools - Utilitários para manipular disquetes de DOS. . * usbutils - Utilitários para observar o bus USB. . * htop - um top mais top que o top. Package: dsi-core-cf Version: 1.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Pre-Depends: debsums Depends: openssh-client, openssh-server, openssh-blacklist, openssl-blacklist, rsync, bzip2, lzop, emacs23 | emacs22 | emacs, emacs23-el | emacs22-el | emacs21-el, vim, vim-doc, joe, strace, slocate | mlocate, dlocate, logcheck, xauth | xbase-clients, gpm, w3m, w3m-img, ncftp, cfv, sux, sudo, less, unzip, debconf-utils, subversion, git, lvm2, cal-logcheck-database, popularity-contest, bind9-host, reportbug, uptimed, fdutils, mtools, pciutils, usbutils, parted, htop, hwinfo, tp-ca-certificates, debian-goodies Recommends: bash-completion, read-edid, apt-listbugs, apt-listchanges Suggests: tp-linux-2.6 | tp-linux-afs-2.6, ud, modconf Priority: Optional Section: dsi Filename: pool/main/d/dsi-core-cf/dsi-core-cf_1.1_all.deb Size: 2810 SHA256: 4210914c798414d00f04b3eec029d1b61a7e908b89c9bdc14d44151fec029ccb SHA1: 947a2816c6a686ec9d3a6933f4c2ccb2b2505617 MD5sum: be868d3371f021d1eca12bbd34623f60 Description: core utilites for a computer managed by chef at DSI This meta-package depends on a group of utilities usefull for the system administrators and users. Package: dsi-hard-9xxx Source: tp-hard-3ware Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 37 Depends: 3dm2, tw-cli, tw-update, tw-firmware-9xxx Priority: extra Section: dsi Filename: pool/main/t/tp-hard-3ware/dsi-hard-9xxx_0.3_all.deb Size: 2854 SHA256: 72f6aa19dd1b0190fae18a6165aa3e2373353b674fbefdb1b4358a3f17bb174a SHA1: 77e291ddae8dcac334fd0939518a394945165394 MD5sum: 9cb717d68ebbb5ed43885398469528ed Description: recomended software for models 9xxx from 3ware Install software useful with controllers 9xxx from 3ware. Package: dsi-logcheck-database Version: 0.1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 423 Priority: optional Section: admin Filename: pool/main/d/dsi-logcheck-database/dsi-logcheck-database_0.1_all.deb Size: 62312 SHA256: fbfc1ffa0349342a45b0c75640a2629f87d8ef28b4ebb2af6149bfcbb89cb4ec SHA1: 93ff11e85cb4c55566be4510b621137636d3f2ad MD5sum: be3337624fe668f1c8bc111d8f88e8f1 Description: extra database of system rules for log checker Ignore less dangerous messages and give examples on how to build personalized rules for the local requirements. . Ignore less dangerous messages from smartmontools. . Ignore connections from authorized amanda server, cacti and nagios. . Extra rules that are not well fitted to be in logcheck-database. Package: dsi-nagios-plugins Source: tp-nagios-plugins Version: 0.5-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 162 Depends: nagios-plugins-basic Suggests: tw-cli, smartmontools, python (>= 2.3), python-ldap, expect, storcli Replaces: tp-nagios-plugins Provides: tp-nagios-plugins Priority: optional Section: dsi Filename: pool/main/t/tp-nagios-plugins/dsi-nagios-plugins_0.5-1_all.deb Size: 33976 SHA256: 375a5f9b4b9630a19b0153739038c2ed74df7110af4d1ebcd4f06ab3de701bb8 SHA1: 66eabbe2352364f2bec714e5503f235493edfe94 MD5sum: 7d3bda45d9729b997b386937d9edb8c9 Description: Plugins for the nagios system that are used in DSI Nagios is a host/service/network monitoring and management system. . This package provides the suite of plugins that are most likely to be useful on a central nagios host on DSI. Package: dsi-net Version: 0.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: iptables, iputils-ping, net-tools, traceroute, bind9-host, arping | iputils-arping, ipcalc, prips, iputils-tracepath, tcptraceroute, vlan, netcat, iptraf, ifstat, iftop, iproute, wireshark | ethereal, tshark | tethereal, tcpdump, tcpick, dsniff, nmap, ipmitool | tp-na-sparc, ethtool Recommends: potion Suggests: cal-net, cal-net-audit, fwbuilder, nemesis Replaces: tp-net Provides: tp-net Priority: optional Section: dsi Filename: pool/main/d/dsi-net/dsi-net_0.1_all.deb Size: 3098 SHA256: 7561cd3bddfb936e3b8f1210478eced6d5dc3386a707b9e02f9170df6686abce SHA1: 6856635c5dda90dc0c0d58d094499da31754af60 MD5sum: 2bb1d4359864ba572bb2e23094d8c79e Description: Utilities usefull to use and diagnose an IPv4 network Here you will find sugestions and recomends for programs to use and diagnose an IPv4 network. . * iptables - to manage the Linux firewall . * iputils-ping - ping with suport for IPv4 and IPv6 . * net-tools - many utils important to manage the network . * traceroute - tradicional traceroute . * bind9-host - host command from bind9 . * arping - a ping command that can query by MAC address . * ipcalc - calculator for IPv4 address . * prips - imprime ranges de IPs, util em scripts . * iputils-tracepath - find the sortest MTU on IPv4 and IPv6 versions . * tcptraceroute - traceroute using TCP connections, very useful to find proxys . * vlan - manage vlans on the phisical interfaces . * netcat - cat para a rede . * iptraf - contador de tráfego em tempo real. . * ifstat - contador de tráfego em tempo real. . * iftop - contador de tráfego por host em tempo real. . * potion - contador de tráfego por host em tempo real. . * iproute - ip command to manage the network on Linux kernel. . * wireshark - sniffer de rede, antigo ethereal . * tshark - ethereal em modo de texto, antigo tethereal . * tcpdump - tradicional programa e captura de tráfego . * tcpink - programa de capatura de conecções TCP . * dsniff - gera e escuta diversos tipos de tráfego . * nmap - port scanner . * fwbuilder - Gerador de regras de firewall com interface gráfica GNOME . * ipmitool - para configuracao e monitorizacao via hardware ipmi, permite a manipulacao de hardware ipmi local e via remota. . * nemesis - gerador de pacotes de qualquer protocolo para humanos Package: dsi-server Version: 1.5 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 26 Depends: dsi-core | dsi-core-cf, dsi-net, dsi-admin, dsi-srv-util | dsi-srv-util-cf Recommends: intel-microcode, amd64-microcode Replaces: tp-server Provides: tp-server Priority: optional Section: dsi Filename: pool/main/d/dsi-server/dsi-server_1.5_all.deb Size: 2212 SHA256: fd664ce5cc626f5fa357d046f2bf6edbc4ffae274a381ff07b051b60f08bc7e7 SHA1: e49180799cffbdf7e8aa1740725026aa70a5e007 MD5sum: 6d9c0523b9cd08839e514b9ef9604d84 Description: utilities for servers at DSI This meta-package install all extra the utilities for a server at DSI. Package: dsi-srv-emacs Version: 0.2 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: emacs24-nox | emacs24 | emacs23 | emacs | emacs23-nox | emacs23-lucid, emacs-goodies-el, muse-el, planner-el, remember-el, python-mode, post-el, debian-el, ispell, iamerican, wamerican Recommends: emacs23-el, emacs23-common-non-dfsg Provides: tp-srv-emacs Priority: optional Section: dsi Filename: pool/main/d/dsi-srv-emacs/dsi-srv-emacs_0.2_all.deb Size: 2568 SHA256: 54add9eb70f0f31bd7c6e913b9d9a8511c390014e8f5e4f22aa55cd0fb2077be SHA1: 6d326c77b78c59e97f74ba3371a310229ee37985 MD5sum: beca65f2d5a91f594ee1b2ff54479663 Description: Software útil para acompanhar o emacs em servidores. * emacs-wiki - sistema tipo wiki para organizar informacao dentro do emacs . * planner-el - sistema de planeamente de tarefas e calendario para o emacs . * python-mode - modo python para emacs . * remember-el - permite guardar notas em qualquer momento para relembrar depois. . * post-el - modo para editar mails. . * debian-el - modos para editar ficheiros de configuração de um sistema Debian . * ispell - "speller" de palavras . * iamerican - suporte de americano para o ispell . * iportuguese - suporte de português para o ispell . * wamerican - lista de palavras segundo a grafia americana para o ispell . * wportuguese - lista de palavras portuguesas para o ispell Package: dsi-srv-util Version: 0.2 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: ncftp, fortunes, fortune-mod, fortunes-min, fortunes-debian-hints, fortunes-mario, gpm, mutt, procmail, rar | unrar, arj, unzip, zoo, zip, sharutils, nrg2iso, memtester, procinfo, tofrodos, uptimed, ispell, iportuguese, wportuguese, iamerican, wamerican, resolvconf, eject, popularity-contest, genisoimage Recommends: lha Suggests: apt-move, ud Replaces: tp-srv-util Provides: tp-srv-util Priority: extra Section: dsi Filename: pool/main/d/dsi-srv-util/dsi-srv-util_0.2_all.deb Size: 2634 SHA256: 5d5aea50467eed229ae77f2a2c7ad7654e2be3115cce6b2fc80972fbe893b0d0 SHA1: 912c43050207a56791acd667f2a6e69f98c0276b MD5sum: ea94bfa945d6ee3d044a537736300bb9 Description: utilities recommended on servers at DSI Um conjunto de software que podem ser muito util nos servidores . * sharutils - shar, unshar, uuencode, uudecode . * procinfo - Displays system information from /proc . * tofrodos - Converts DOS <-> Unix text files, alias tofromdos . * genisoimage - cria imagens iso9660, indicado para CDs e DVDs Package: dsi-srv-util-cf Version: 0.1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: ncftp, fortunes, fortune-mod, fortunes-min, fortunes-debian-hints, fortunes-mario, gpm, mutt, procmail, rar | unrar, arj, unzip, zoo, zip, sharutils, nrg2iso, memtester, procinfo, tofrodos, uptimed, ispell, iportuguese, wportuguese, iamerican, wamerican, eject, popularity-contest, genisoimage Recommends: lha Suggests: apt-move, ud Replaces: tp-srv-util Provides: tp-srv-util Priority: extra Section: dsi Filename: pool/main/d/dsi-srv-util-cf/dsi-srv-util-cf_0.1_all.deb Size: 2622 SHA256: 8826581cd4dfb7913f9fbed9d58fe3d2d29b283f5cfd8e92c4f4c7eae7b71056 SHA1: ab89a5ef6947555e0fa8723e92e81f557d3e76b0 MD5sum: 657a0fd1f64edfda7568cd8611655c3a Description: utilities recommended on servers at DSI Um conjunto de software que podem ser muito util nos servidores . * sharutils - shar, unshar, uuencode, uudecode . * procinfo - Displays system information from /proc . * tofrodos - Converts DOS <-> Unix text files, alias tofromdos . * genisoimage - cria imagens iso9660, indicado para CDs e DVDs Package: dsi-task2-nrpe-srv Source: dsi-task-nagios Version: 0.4 Architecture: all Maintainer: Jose Calhariz Installed-Size: 29 Pre-Depends: dsi-conf-nrpe (>= 0.7) Depends: nagios-nrpe-server, tp-nagios-plugins (>= 0.8) Homepage: http://blog.calhariz.com Priority: extra Section: dsi Filename: pool/main/d/dsi-task-nagios/dsi-task2-nrpe-srv_0.4_all.deb Size: 3848 SHA256: 83144f89e81a1798dc9852374bb00cfb8b3c182e91aa84867c0869d3945c3307 SHA1: de377fe529fcd3b966c46eb4253dba88a853b5bb MD5sum: f9c1e7420b51df2feaa6e837bd6f9171 Description: Software needed to run nrpe-server at DSI. Depends on all the software to run an advanced client of nagios. This clients need an nrpe-server to run more advanced plugins on the client. Package: dsi-web Version: 0.3 Architecture: all Maintainer: Jose Calhariz Installed-Size: 27 Depends: w3m, w3m-img, links2, mozilla-firefox | iceweasel, iceweasel-l10n-pt-pt, iceweasel-l10n-pt-br, icedove, icedove-gcontactsync, icedove-l10n-pt-pt, icedove-l10n-pt-br, enigmail | mozilla-thunderbird-enigmail, gsfonts-x11 Recommends: tp-flash-marillat | tp-flash-debian | tp-na-alpha | tp-na-powerpc | tp-na-sparc, icedove-l10n-es-es, icedove-l10n-it, icedove-l10n-sv-se, icedove-l10n-tr, iceweasel-l10n-el, iceweasel-l10n-es-es, iceweasel-l10n-it, iceweasel-l10n-sv-se, iceweasel-l10n-tr, google-chrome-stable | chromium-browser Suggests: mozilla-plugin-vlc Priority: optional Section: dsi Filename: pool/main/d/dsi-web/dsi-web_0.3_all.deb Size: 2704 SHA256: d45e3f78b75b05b6566f72f7807271e105d78aca12628315d09a2dc9319b6710 SHA1: 5c0acd8b1bc7ad94af1ca3f5dab6ec6239825c4e MD5sum: 810440b223bfa5e63bd108e9ed339c38 Description: pacotes interessantes de web para o Taguspark. w3m - Browser de web em modo de texto, permite também ver ficheiros locais de html. . links2 - Browser de web em modo de texto . mozilla - agora é iceape . firefox - agora é iceweasel . thunderbird - agora é icedove . mozilla-helix-player, mozilla-mplayer, mozilla-plugin-vlc, kaffeine-mozilla - vários plugins para tocar ficheiros multimedia dentro do browser . flashplugin-nonfree - instalador do plugin de flash Package: kibana Version: 3.0.0milestone4-1 Architecture: all Maintainer: Andreas Wirooks Installed-Size: 4436 Depends: apache2 | nginx Homepage: http://www.elasticsearch.org Priority: optional Section: web Filename: pool/main/k/kibana/kibana_3.0.0milestone4-1_all.deb Size: 1154834 SHA256: 25159f941e93b9b74c51d5f161ee562c930d30ec79ab3348cae12a5d3be66859 SHA1: 151a485dc023a348b90aeee19283c44e34f21a9b MD5sum: 8872d064625dc88ed2e320a858cc4db7 Description: Visualize logs and time-stamped data Visualize logs and time-stamped data Package: libafsauthent1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 591 Depends: libafsrpc1 (>= 1.6.5), libc6 (>= 2.11), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libafsauthent1_1.6.5-1~bpo70+1_i386.deb Size: 211100 SHA256: 4ee4dc7eabbe1632aefcc1537ea1a2f6b0ee3dd837ce9f0ed852a01605f77e4a SHA1: 8728add74d8723a4e25c74866382a1e63ffff36a MD5sum: 7aaca62953669576169416cdf30c8772 Description: AFS distributed file system runtime library (authentication) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing AFS client authentication and token management. Package: libafsrpc1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 476 Depends: libc6 (>= 2.4) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libafsrpc1_1.6.5-1~bpo70+1_i386.deb Size: 202106 SHA256: 737ac07a29267fb93ba3ea2814d7b24ee66aed1cfd8879a868a25bba09ab5280 SHA1: 0344e6817de3dd2f9f57d434f5aa298fb571e611 MD5sum: 55e3314b2ea49a16b258dc0be6460a1f Description: AFS distributed file system runtime library (RPC layer) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing the Rx protocol and other AFS RPC functionality. Package: libkopenafs1 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 131 Depends: libc6 (>= 2.3.6-6~) Homepage: http://www.openafs.org/ Priority: optional Section: libs Filename: pool/main/o/openafs/libkopenafs1_1.6.5-1~bpo70+1_i386.deb Size: 84790 SHA256: 00e2e1b19a0332b073f806b74845bdc687d17ae35ee191a924a714f7804d45d4 SHA1: 6ccd4dca3ab7922d022d3989aa05a7d3689fc779 MD5sum: bc5bb278fe4cb0ab3a9b214953f80354 Description: AFS distributed file system runtime library (PAGs) AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the shared library implementing an interface to manipulating AFS process authentication groups (PAGs). It provides the a subset of the interface provided by the Heimdal libkafs library. Package: libopenafs-dev Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 9948 Depends: libc6 (>= 2.4), libafsauthent1 (= 1.6.5-1~bpo70+1), libafsrpc1 (= 1.6.5-1~bpo70+1), libkopenafs1 (= 1.6.5-1~bpo70+1) Suggests: openafs-doc Conflicts: arla-dev, liblwp-dev Homepage: http://www.openafs.org/ Priority: extra Section: libdevel Filename: pool/main/o/openafs/libopenafs-dev_1.6.5-1~bpo70+1_i386.deb Size: 1409454 SHA256: 4898c956d0114f6f65ebab2dd78f03121dc6292a8aadc1a95840f5741391a78e SHA1: 19948819ebdac2389139b44d3f2c9ba66afb8074 MD5sum: cb261c07d55f5d920e00514cc2dd0f1a Description: AFS distributed filesystem development libraries AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides static development libraries and headers needed to compile AFS applications. Package: libpam-openafs-kaserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 1051 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), openafs-client (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: admin Filename: pool/main/o/openafs/libpam-openafs-kaserver_1.6.5-1~bpo70+1_i386.deb Size: 272886 SHA256: 897a64c5c9680534aacc352f7eed89cdcfcd5e7ecf4c41d179492eea5531ece9 SHA1: bac646dca09ef45a553c886b6ca2df2de8c98f26 MD5sum: 8dce9d95640af72ad6b99f623b18ce49 Description: AFS distributed filesystem kaserver PAM module AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides a PAM module for existing sites using the AFS kaserver for authentication. New sites should use a Kerberos v5 implementation, a Kerberos v5 PAM module such as libpam-krb5, and libpam-afs-session. Package: openafs-client Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 8557 Depends: libc6 (>= 2.11), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.10+dfsg~), libncurses5 (>= 5.5-5~), libtinfo5, debconf (>= 0.5) | debconf-2.0 Recommends: lsof, openafs-modules-dkms (>= 1.6.5-1~bpo70+1) | openafs-modules-source (>= 1.6.5-1~bpo70+1) | openafs-modules3 Suggests: openafs-doc, openafs-krb5 Conflicts: arla Breaks: openafs-modules1, openafs-modules2 Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-client_1.6.5-1~bpo70+1_i386.deb Size: 1971658 SHA256: 799cec2d36d68253eef597540e8e89a60a76f8de86b77620cf0aa956055ea806 SHA1: 1891597f86f9be22c4c85937b2d8030f78fde5b5 MD5sum: 29b5b16523f64f476d6109fe7c4a99b3 Description: AFS distributed filesystem client support AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides basic client support to mount and manipulate AFS. If your site uses Kerberos v5 authentication for AFS, you will also want to install openafs-krb5. Package: openafs-dbg Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 24975 Depends: openafs-fileserver (= 1.6.5-1~bpo70+1) | openafs-dbserver (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: debug Filename: pool/main/o/openafs/openafs-dbg_1.6.5-1~bpo70+1_i386.deb Size: 22543108 SHA256: 47146462865a20529261302755c17a9994d8f734600e91f29a2057b82b526a06 SHA1: 5f2a23b83fa8c4088146b5fdebf29bbfc804d8c2 MD5sum: 5744aed9275813e1ba2f0efd0804ba34 Description: AFS distributed filesystem debugging information AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the debugging information for the OpenAFS server binaries (the openafs-fileserver and openafs-dbserver packages). Package: openafs-dbserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 1933 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), perl, openafs-fileserver Recommends: openafs-client Suggests: openafs-doc Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-dbserver_1.6.5-1~bpo70+1_i386.deb Size: 479426 SHA256: 1cd26a3fd5bd977cf8778cd7324a7d91314b5fb3a43708582fe7ddaa51b7a43f SHA1: ef5871fe25157ccdd1d373358df1d4a4dfc31cfb MD5sum: b7cacd793cd71488564f525543a4671d Description: AFS distributed filesystem database server AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides AFS database server binaries. It should be installed on the servers that will act as volume location and protection servers. Package: openafs-doc Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 11115 Recommends: libjs-jquery Homepage: http://www.openafs.org/ Priority: optional Section: doc Filename: pool/main/o/openafs/openafs-doc_1.6.5-1~bpo70+1_all.deb Size: 3988806 SHA256: 0f8f6207d21afe17d219d9decb84e77fa35be1ba2f56fa7ac67898697c59b27e SHA1: 7caaae3a3cc289a124a9a74cb3315ed404849a88 MD5sum: bbfeb344ed32f3565b7cd7a1f02c851e Description: AFS distributed filesystem documentation AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the OpenAFS user's and reference manuals, some protocol documentation, and other OpenAFS documentation. Package: openafs-fileserver Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 7780 Depends: libc6 (>= 2.10), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), debconf (>= 0.5) | debconf-2.0, lsb-base, openafs-client Recommends: ntp | time-daemon Suggests: openafs-doc Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-fileserver_1.6.5-1~bpo70+1_i386.deb Size: 1294114 SHA256: 718c862fda846139deb4849280cd34d66cd86d6079971bc2f63a64dd8cabd99b SHA1: 63310e7fa8bc66be01839d215cb966f7fd118cad MD5sum: 7899577870896466bfaebbd9dda06ca9 Description: AFS distributed filesystem file server AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the AFS fileserver binaries. It should be installed on any machine that will export files into AFS. Package: openafs-fuse Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 978 Depends: libc6 (>= 2.4), libfuse2 (>= 2.8.1), openafs-client (= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: net Filename: pool/main/o/openafs/openafs-fuse_1.6.5-1~bpo70+1_i386.deb Size: 351002 SHA256: ce76d3916734526a86cf8899a5701ca5d4d00e87afc064cac86de868ffe6e0ea SHA1: deb5d35f4152c7eebe0141fd1be336bad2413ed9 MD5sum: be08ab8c4b6ae58119d9d523a59d7954 Description: AFS distributed file system experimental FUSE client AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides an experimental FUSE implementation of the AFS client as afsd.fuse. This currently only provides read-only access to AFS, doesn't work with all of the normal AFS client programs, and must be started manually, but may be of interest in situations where read-only access is sufficient and the kernel module cannot be built. Package: openafs-kpasswd Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 793 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.6.dfsg.2), openafs-client (= 1.6.5-1~bpo70+1) Conflicts: heimdal-clients, kerberos4kth-clients, krb5-user Homepage: http://www.openafs.org/ Priority: extra Section: net Filename: pool/main/o/openafs/openafs-kpasswd_1.6.5-1~bpo70+1_i386.deb Size: 291718 SHA256: 5568d56df4ce72ea50550f9c0e54e8f5d0dd86977e0f9f73bd27a769c366b0e1 SHA1: ec08e08cbc4c15646fa8af455ad5d6a3b31be3bb MD5sum: 7fdf72c0b010ac005d855b02339f3006 Description: AFS distributed filesystem old password changing AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides kpasswd and kas, utilities needed by the OpenAFS kaserver to create users and change passwords. Only install this package if you are already using kaserver; generally you should not install this package for new cells or for cells using Kerberos v5. Package: openafs-krb5 Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: i386 Maintainer: Russ Allbery Installed-Size: 860 Depends: libc6 (>= 2.4), libcomerr2 (>= 1.01), libk5crypto3 (>= 1.6.dfsg.2), libkrb5-3 (>= 1.10+dfsg~) Breaks: openafs-client (<< 1.4.7.dfsg1-1) Homepage: http://www.openafs.org/ Priority: optional Section: net Filename: pool/main/o/openafs/openafs-krb5_1.6.5-1~bpo70+1_i386.deb Size: 266028 SHA256: 46c1c157dd94d4ce820353abc0c4861b745a81ba76c8ff3f425b5f93f2d023d0 SHA1: 6ec056e580ba2e85163394122aceeff4162152d0 MD5sum: 93907c2ec50b6123c785389cdc4a8326 Description: AFS distributed filesystem Kerberos 5 integration AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides aklog, a utility for authenticating to AFS using Kerberos 5. It also provides asetkey, a utility to set AFS server keys from a Kerberos keytab, and ka-forwarder, a utility to forward kaserver requests to a KDC using fakeka. Package: openafs-modules-dkms Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 5975 Depends: dkms (>= 2.1.0.0), perl, libc6-dev Recommends: openafs-client (>= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: kernel Filename: pool/main/o/openafs/openafs-modules-dkms_1.6.5-1~bpo70+1_all.deb Size: 925022 SHA256: ed2e30f6e91ee13090b924ae337e78d8aec7c4b3f1280ccd8a4ffcce287322c9 SHA1: dc45ce1d075ae29faba682ce8828e0639dec1c58 MD5sum: bfc2ff57afd89d96307f55b45a134b9f Description: AFS distributed filesystem kernel module DKMS source AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package contains the source for the AFS kernel module, packaged with appropriate configuration for DKMS to build new modules dynamically. Package: openafs-modules-source Source: openafs Version: 1.6.5-1~bpo70+1 Architecture: all Maintainer: Russ Allbery Installed-Size: 1135 Depends: debhelper (>= 8), module-assistant | kernel-package, perl Recommends: openafs-client (>= 1.6.5-1~bpo70+1) Homepage: http://www.openafs.org/ Priority: extra Section: kernel Filename: pool/main/o/openafs/openafs-modules-source_1.6.5-1~bpo70+1_all.deb Size: 1121456 SHA256: 85fb4df97392bb1737dc1a0cfbef39b7ea4ec30f72038b50cc528c09da733981 SHA1: 910fbc91b8871ab3be7f2dfad35ce72a00da87b4 MD5sum: b3a38838cbee2bd15fb182ff1eb374dc Description: AFS distributed filesystem kernel module source AFS is a distributed filesystem allowing cross-platform sharing of files among multiple computers. Facilities are provided for access control, authentication, backup and administrative management. . This package provides the source to the AFS kernel module in a form suitable for use by module-assistant or kernel-package. Package: switchconf Version: 0.0.13-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 104 Depends: lsb-base (>= 3.0-6), liblockfile1 Priority: optional Section: admin Filename: pool/main/s/switchconf/switchconf_0.0.13-1_all.deb Size: 11476 SHA256: b7ee7cd0274c5ee47940fcb71da084d2e9df557940823a45fe7e5b0c63b93731 SHA1: 16eee359dc281b4a24738de6fb82d4b1a429b674 MD5sum: 3990f3b51d893b04d153edfc310fc0ef Description: switch between system configuration sets Switchconf allows users to easily change their system's settings, choosing between the possible configurations for different environments. . Most switchconf users are laptop owners who want to change their network settings according to where they currently are - but there are many cases for non mobile systems to desire to choose between configuration sets. . Switchconf is a very simple script that takes its arguments from the command line. It allows you to maintain different sets of configurations, installing the desired set of configuration when called with its name as an argument, and execute a pre-specified set of commands before and after the switch. Package: sysinfoupdate Version: 0.10.0-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 95 Depends: parted Recommends: pciutils, usbutils, hdparm, net-tools, kmod, procps Suggests: sdparm, hwinfo, ipmitool, iproute, ntp, smartmontools, hpadu, hpacucli, hp-health, hponcfg, read-edid, storcli Homepage: http://blog.calhariz.com Priority: extra Section: admin Filename: pool/main/s/sysinfoupdate/sysinfoupdate_0.10.0-1_all.deb Size: 16156 SHA256: 9b72e15887dd1d8d112a6b789360ef20a94f86bfcb351569691da9ba0640b180 SHA1: 8e8e6da86955bd67e17a550e91767fe6728e3fd2 MD5sum: b1ac7db059e4c54e4c6ef0bfac036151 Description: Collects information about the system This information will be help full to track changes made to a system. Changes made by the system administrator or by the installation of new software, upgrades, security updates, or other changes. It's a script that collects information useful to maintain a diary or for bare bones recovery from backups. Package: tp-admin Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 36 Depends: dsi-admin Priority: optional Section: dsi Filename: pool/main/t/tp-admin/tp-admin_2.0_all.deb Size: 2080 SHA256: f7723717a96c0842313f64f2b7ba72ebf476f7e585c497edf4cb53a50ea03461 SHA1: be100b5ed90c3c8d9f1152c1a8279596a253a12b MD5sum: cea56d214c1a31c50b7721dac852f8db Description: transitional package to dsi-admin This is a transitional package to facilitate the upgrade to the new name dsi-admin. It can be safely removed after the upgrade. Package: tp-aklog Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 35 Depends: openafs-krb5 (>= 1.4) Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-aklog_0.10_all.deb Size: 4178 SHA256: 7e90283d43785daab86dff4f4a6cbabf22755036f347104afb7393c37654e980 SHA1: 3bc9fd02489a3b1442b460fa197a27e746c9007b MD5sum: a8144a00e51d7d32e3d161b497596703 Description: personalized aklog to be used in IST This aklog is personalized to work arouns some limitations in the original aklog from openafs-krb5 Package: tp-conf-afs-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 39 Depends: gawk Enhances: tp-task2-afs-heimdal-client, tp-task2-afs-mit-client Replaces: tp-conf-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-conf-afs-client_0.10_all.deb Size: 4808 SHA256: f2fc47bcb1c702ef758372a1f0b72159ee14bc9bb93a1d8ce0593880442d6adb SHA1: 53ec056df3632112ab3721f67fa96bb3a8369e20 MD5sum: c2a6b038ec10aa9d436e22f543207fb1 Description: configure openafs and kerberos for use in IST Configure the kerberos and the openafs to be a client of openafs in Instituto Superior Tecnico. You can choose to access the files in Taguspark or in IST-Alameda. You can use it even if you don't have an afs client installed. . Run tp-conf-openafs-config to change the default cell. You don't need to have an account, but you may to talk to CIIST to get one. Package: tp-conf-afs-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 35 Depends: gawk Recommends: tp-conf-afs-client, tp-conf-libnss-ldap, tp-conf-libpam-ldap Enhances: tp-task2-afs-heimdal-login, tp-task2-afs-mit-login Replaces: tp-conf-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-conf-afs-login_0.10_all.deb Size: 4172 SHA256: 5ce06f4a9b6e762f1b2ac5247a65bb838c75d96b2e9ca852f1264028387fe00b SHA1: 7a77c1d80c64b07b260a230eb288cb71580c2999 MD5sum: 57461f2b40da7cde74998657550c43b9 Description: configure centralized login on Taguspark Configure the kerberos and the openafs to be a client of openafs in Instituto Superior Tecnico. . Run tp-conf-openafs-config to change the default cell. If don't need to have an account, but you may to talk to CIIST to get one. Package: tp-conf-hostname Version: 0.7 Architecture: all Maintainer: Jose Calhariz Installed-Size: 39 Depends: net-tools, bind9-host, hostname (>= 2.13) Conflicts: tp-hostname Priority: optional Section: taguspark Filename: pool/main/t/tp-conf-hostname/tp-conf-hostname_0.7_all.deb Size: 4772 SHA256: 59c3077b8fb2669b2fa35ed5fa3fa6458cd494d4137d94db6da3d464ea8219f3 SHA1: 8cfc3f9815b987b3b0436fbd18c86000d25f5b96 MD5sum: 6e4e1d7a53d29cfcc46c9fe01bf2d3bd Description: Detecta e configura no arranque o nome da maquina Apenas tem utilidade nos laboratários do Taguspark sobre gestão do CIIST-TP. Ou seja, não quer instalar este pacote a menos para fazer investigação sobre pacotes Debian. Package: tp-conf-ldap-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 67 Depends: ucf, tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal, tp-task2-ldap-srv Recommends: openssl, gnutls-bin Conflicts: slapd (<= 2.4) Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-conf-ldap-srv_0.12_all.deb Size: 6272 SHA256: 69bd351f62dc56f70e6f36cfaa1448033cc26a198f9b6fde3af49ea8aca5ea43 SHA1: bb5867f3a4e1b3140fc50068e03bfe2faa1f2795 MD5sum: c4fced1321a223bb934b5537c4551219 Description: configure the ldap server for Taguspark Contains a config files and a script to configure the ldap server to authenticate users to the kerberos realm. . Don't forget to configure correctly your Kerberos instalation. Package: tp-conf-sasl2-cyrus Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 32 Depends: tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-conf-sasl2-cyrus_0.12_all.deb Size: 3692 SHA256: 5a592866d9a52a634850526f6502222defdc350b64956254571b75024604d0c2 SHA1: d6f71c71575acd8bfd8a3cf58225da19814d24f1 MD5sum: 6d421743afd68ea5df80830a41933bb3 Description: configura saslauthd da Cyrus para Kerberos5/GSSAPI Experimental . Configura minimamente o saslauthd para o mecanismo kerberos. . Nao se esqueça de ter o Kerberos bem configurado. Package: tp-conf-srv Version: 0.80 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 576 Depends: dpatch, dpkg-dev, gcc | c-compiler, make | build-essential Recommends: logrotate (>= 3.7.1) Suggests: tp-conf-ldap-client Conflicts: tp-srv-conf (<< 0.25) Priority: optional Section: dsi Filename: pool/main/t/tp-conf-srv/tp-conf-srv_0.80_all.deb Size: 87538 SHA256: edbd45242e311d6a0f1a0df9ebdf26d601bd62063eb48af443541ee7b51b861e SHA1: a0689acb60b6e81190fafc12875cb689af648f90 MD5sum: e61f650d19ae03b761068000eb0b995e Description: scripts and patches to configure a server Includes patches and scripts to automatically configure a machine like a tipical server. . Patch and script to configure tripwire. Package: tp-core Version: 3.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-core Priority: optional Section: dsi Filename: pool/main/t/tp-core/tp-core_3.0_all.deb Size: 2082 SHA256: a4b773b70fa48de86d5643fb0d1a6b04195e1a3db88392419e020537be30433a SHA1: 7a7be4cac991e2ee251626f4f723a16f7bd612d4 MD5sum: 9f56ccc26ce3ebce50d1bcace540efc8 Description: transitional package to dsi-core This is a transitional package to facilitate the upgrade to the new name dsi-core. It can be safely removed after the upgrade. Package: tp-hard-9xxx Source: tp-hard-3ware Version: 0.3 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 28 Depends: dsi-hard-9xxx Priority: extra Section: dsi Filename: pool/main/t/tp-hard-3ware/tp-hard-9xxx_0.3_all.deb Size: 2624 SHA256: 249fc400c761794e97b46cb3614ea703deb6df326315e22e223258f7e8dcdeef SHA1: ffb2ade5f13d46cd2a750d1266a79f48c50b5eea MD5sum: 46bb1f4d1d8adf3eef53305b5ad060ae Description: transitional package to dsi-hard-9xxx This is a transitional package to facilitate the upgrade to the new name dsi-hard-9xxx. It can be safely removed after the upgrade. Package: tp-nagios-plugins Version: 0.9-1 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 174 Depends: nagios-plugins-basic, sudo Suggests: tw-cli, smartmontools, python (>= 2.3), python-ldap, expect, storcli Priority: optional Section: dsi Filename: pool/main/t/tp-nagios-plugins/tp-nagios-plugins_0.9-1_all.deb Size: 36162 SHA256: 500bc6a8423e2f1c6a8fdb0be8e657ad827f52d53885d8a8037580378e5ea6c8 SHA1: f566cb67d0e294288641cf984349c002a227d84a MD5sum: 3d1cc4083ffa3b71696ad5da0f5b780b Description: Plugins for the nagios system that are used in DSI Nagios is a host/service/network monitoring and management system. . This package provides the suite of plugins that are most likely to be useful on a central nagios host on DSI. Package: tp-net Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-net Priority: optional Section: dsi Filename: pool/main/t/tp-net/tp-net_2.0_all.deb Size: 2072 SHA256: 4ffb758d0c450cdf509277be9dd1123a60dfc050b074fe603f5bf87af77303a8 SHA1: 7ac166430fb1c2eda893037be13c6d0a624fd76d MD5sum: 639b176b8e694eb33d1a990eb6fb9b59 Description: transitional package to dsi-net This is a transitional package to facilitate the upgrade to the new name dsi-net. It can be safely removed after the upgrade. Package: tp-srv-emacs Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-srv-emacs Priority: optional Section: dsi Filename: pool/main/t/tp-srv-emacs/tp-srv-emacs_2.0_all.deb Size: 2088 SHA256: 8f25b516a8ebf5671f2b3d67217820a5eefa319874c69f258bf57afa3ad11b04 SHA1: 379c4dcdf6e09dd1f6f940b6bf647ee94f2fc215 MD5sum: d4f0e10c2962d476c07f27c252c4bbaf Description: transitional package to dsi-srv-emacs This is a transitional package to facilitate the upgrade to the new name dsi-srv-emacs. It can be safely removed after the upgrade. Package: tp-srv-util Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-srv-util Priority: optional Section: dsi Filename: pool/main/t/tp-srv-util/tp-srv-util_2.0_all.deb Size: 2090 SHA256: a4b9671d06a5637ec93ead469d5be9e3051f0cb0271b1d9cbac9d08ef1c085ea SHA1: 49bcac440e237abef6808bc05dd81e4ccda7afc0 MD5sum: f66ccc0936ef64379734324866ba5233 Description: transitional package to dsi-srv-util This is a transitional package to facilitate the upgrade to the new name dsi-srv-util. It can be safely removed after the upgrade. Package: tp-task2-afs-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: tp-task2-afs-heimdal-client | tp-task2-afs-mit-client Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-client_0.10_all.deb Size: 3374 SHA256: 71c05eae3b94ca9cee791a01f8a3089909b00af6e1f08c938bb15c9af5a1f196 SHA1: 3629de7fc68faede4a538a4d10a77aaa3a9cb736 MD5sum: cc35ef75500c17cc9c17a606fb9fa209 Description: software to be client of openafs Software needed to be a client of openafs, to authenticate you need to choose between kerberos client from Heimdal or MIT. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-heimdal-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: heimdal-clients, openafs-client Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs, tp-task-openafs-heimdal Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-heimdal-client_0.10_all.deb Size: 3388 SHA256: 51558df85fd97a8c7885aacdb1bf7e48c00ce5846d2c463751447f75cec0217c SHA1: 908f0eec4cce26efdc46752d9c6b23f82f7c7aad MD5sum: 0274a3aaaa9ebc4b663f04e7fb3fc5d7 Description: software to be a client of openafs and kerberos of Heimdal Software needed to be a cliente of openafs using Heimdal implementation of Kerberos 5. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-heimdal-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: heimdal-clients, openafs-client, tp-conf-afs-client, tp-conf-afs-login, tp-aklog, libnss-ldapd | libnss-ldap, libpam-ldapd | libpam-ldap, libpam-heimdal, openafs-krb5, libpam-afs-session Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs-log, tp-task-openafs-login-heimdal Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-heimdal-login_0.10_all.deb Size: 3704 SHA256: 322507aa62864a9b63f9ed61860365517eb29012570c0e0adefdc53e20d4ca88 SHA1: 6ebce00bb35c7e5558b9a9ce913371a603d63b77 MD5sum: 1c9ff04b6fb6d4f1498a8c3aec208a24 Description: login using Kerberos Heimdal, LDAP and OpenAFS Software needed to login using Kerberos passwords, information users from LDAP and home directory in OpenAFS directories. More commonly named integrated login. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . Auto configure is not yet available, use this information on this Wiki page https://ciist.ist.utl.pt/ciwiki/LoginIntegradoNaDebianSargeTagus . Description of packages: . * heimdal-clients - kerberos clients from Heimdal . * openafs-client - openafs client to access openafs file . * libnss-ldap - add support for ldap method to nsswitch.conf . * libpam-ldap - ldap module for pam . * libpam-krb5 - kerberos module for pam . * openafs-krb5 - aklog program, not really needed . * libpam-afs-session - openafs-session module from pam, needed to get afs tokens. Package: tp-task2-afs-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: tp-task2-afs-heimdal-login | tp-task2-afs-mit-login Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-login_0.10_all.deb Size: 3392 SHA256: c07bf4efa0155c53636dcadb7bfc84ee88b7867a18579c79fdc6db5a7bb7bc0f SHA1: c71a910635fc87e8e0f1195b302426e497753f74 MD5sum: e2f849933fbb67d096b89cf96c2fa71b Description: software to configure login for homedir in AFS Software needed for your homedir to be placed in AFS, to authenticate you need to choose between kerberos client from Heimdal or MIT. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software use tp-conf-openafs-config. Package: tp-task2-afs-mit-client Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: krb5-user, openafs-client, openafs-krb5 Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-mit-client_0.10_all.deb Size: 3400 SHA256: 7f9b129e5f2d5e7a77fb37ecea2fe7555074224ac42c6566af048c8ca68a5890 SHA1: 252fe591b2e0e7586f09281d0c7487ac157c6359 MD5sum: 31a817f5ac88f4b8304f15f82bae9cb8 Description: software to be a client of openafs and kerberos of MIT Software needed to be a cliente of openafs using MIT implementation of Kerberos 5. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . To configure the software run tp-conf-openafs-config or to change the defalt cell. Package: tp-task2-afs-mit-login Source: tp-task-openafs Version: 0.10 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 29 Depends: krb5-user, openafs-client, tp-conf-afs-client, tp-conf-afs-login, tp-aklog, libnss-ldapd | libnss-ldap, libpam-ldapd | libpam-ldap, libpam-krb5, openafs-krb5, libpam-afs-session Recommends: openafs-modules2 | openafs-modules-source Replaces: tp-openafs Priority: optional Section: dsi Filename: pool/main/t/tp-task-openafs/tp-task2-afs-mit-login_0.10_all.deb Size: 3682 SHA256: 33a6be6387689734cddd57f4d3f827d2e76b7bf40ff8878890790122a0ad2abd SHA1: af09b454257c10de3c1ede90e3e93567286ae41b MD5sum: 27f73078233a625a3bc32fb12391b44d Description: login using MIT Kerberos, LDAP and OpenAFS Software needed to login using Kerberos passwords, information users from LDAP and home directory in OpenAFS directories. More commonly named integrated login. . You can use pre-compiled modules for Debian v3.1 Kernels or install openafs-modules-source to compile your own modules. . Auto configure is not yet available, use this information on this Wiki page https://ciist.ist.utl.pt/ciwiki/LoginIntegradoNaDebianSargeTagus . Description of packages: . * krb5-user - kerberos clients from MIT . * openafs-client - openafs client to access openafs file . * libnss-ldap - add support for ldap method to nsswitch.conf . * libpam-ldap - ldap module for pam . * libpam-krb5 - kerberos module for pam . * openafs-krb5 - aklog program . * libpam-afs-session - openafs-session module from pam, needed to get afs tokens. Package: tp-task2-ldap-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: slapd, tp-ca-certificates, tp-conf-ldap-client, tp-conf-ldap-srv, db4.2-util, ldap-utils Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-ldap-srv_0.12_all.deb Size: 2864 SHA256: cac17c4d7172f7cada4a0732c5d2c41bffc9d8ed6d53b4e933180bf07206d9d5 SHA1: 162fec8cdde52f0a97be739db0f0b79b8eebcafa MD5sum: 502428628b3b6e79071fa84b00ca73fe Description: select ldap server from Open LDAP Package: tp-task2-sasl2-cyrus-clt Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-clt_0.12_all.deb Size: 3068 SHA256: d822cd1327cdabc7aaab4a02d5d3e439e4d2f2f83a762cbb5214a28076ca7d7f SHA1: 79cf8093570d7b7b4f176dd74b68c43677bb01de MD5sum: f0ccb6768bbc119193b2cdba419943bf Description: sasl2 from cyrus to handle autentications for clients Install libraries and configurator to enable the client side of the sals2 autentications using Kerberos5/GSSAPI. . This permits to use client software of services that use sasl2 to autenticate users. Package: tp-task2-sasl2-cyrus-heimdal Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: libsasl2-modules-gssapi-heimdal, heimdal-clients, tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-heimdal_0.12_all.deb Size: 2970 SHA256: f10583d2efc5cb9831bf7bc9c2cc8eeebe0e55bcb768704464c6470fd539aa62 SHA1: 67bb555727f003c88ec203b47b2c239191e78d81 MD5sum: 9882389d8a5fa204844cb0fd112a283d Description: sasl2 Kerberos5/GSSAPI using Heimdal implementation Seleciona o software e os configuradores para instalar um servidor de salsauthd a fazer autenticação GSSAPI ou Kerberos5 . Usa a implementação da Cyrus do SASL2. . Usa a implementação Heimdal do Kerberos. Package: tp-task2-sasl2-cyrus-mit Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: libsasl2-modules-gssapi-mit | libsasl2-gssapi-mit, krb5-user, tp-conf-afs-client Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-mit_0.12_all.deb Size: 2978 SHA256: 6af0270791b7261bf4f4bf49194aec97daa7cbbe947c939e58bfe03fd5b3acf6 SHA1: df36129f4b3ab5f0736773ddad2da9001db6bf4f MD5sum: a923ebea719f4f7fbecd3bc01fc52c70 Description: sasl2 Kerberos5/GSSAPI using MIT implementation . Seleciona o software e os configuradores para instalar um servidor de salsauthd a fazer autenticação GSSAPI ou Kerberos5 . Usa a implementação da Cyrus do SASL2. . Usa a implementação Heimdal do Kerberos. Package: tp-task2-sasl2-cyrus-srv Source: tp-task-gemeas Version: 0.12 Architecture: all Maintainer: Jose M Calhariz Installed-Size: 27 Depends: sasl2-bin, tp-task2-sasl2-cyrus-mit | tp-task2-sasl2-cyrus-heimdal Priority: extra Section: dsi Filename: pool/main/t/tp-task-gemeas/tp-task2-sasl2-cyrus-srv_0.12_all.deb Size: 2952 SHA256: 2a056ae29db9459bc227578954f54fffef5a7d9921cba32b07ef1d4b965edb51 SHA1: 48bd9ff2b260bf1041d3189aa368dc2484f707b9 MD5sum: b2fee3072f9b9fb99b29d5589595072d Description: sasl2 from cyrus to handle autentications for servers Install libraries and configurator to enable the server side of the sals2 autentications using Kerberos5/GSSAPI . This permits to enable the sasl2 support on server side, for services that want to use that to authenticate users. Package: tp-web Version: 2.0 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: dsi-web Priority: optional Section: dsi Filename: pool/main/t/tp-web/tp-web_2.0_all.deb Size: 2076 SHA256: 9a2788eecec1abc6cba375a09781dcc0518bc0994cf59a054fcb0b742500e225 SHA1: 6ef4864dc3086b46ee96699f5f4a6fd715d78dfc MD5sum: e333aaebf9c2cc6a331a63bddaeedaf4 Description: transitional package to dsi-web This is a transitional package to facilitate the upgrade to the new name dsi-web. It can be safely removed after the upgrade. Package: tp-x11 Version: 3.1 Architecture: all Maintainer: Jose Calhariz Installed-Size: 26 Depends: xorg, xserver-xorg, xserver-xorg-video-all, mdetect, mesa-utils, xterm, icedax | cdda2wav, cdparanoia Recommends: read-edid, xcdroast, xresprobe Suggests: xv Priority: optional Section: dsi Filename: pool/main/t/tp-x11/tp-x11_3.1_all.deb Size: 2376 SHA256: 109b656aa32cd3a3f4313a448b4914d97a5d6635f2a167e26e2c87681a85843f SHA1: fade9c527bbdeb614e8c32ab955aa17ee1f40626 MD5sum: bd33b73cb04dde70d1374736574ffb94 Description: Pacotes de X11 . xterm - Apesar de antigo ainda é um dos melhores emuladores de terminais. . xv - Um classico na visualizacao e manipulacao de imagens . xresprobe - realiza uma sonda DDC aos monitores e LCDs para descobrir as resoluções suportadas. Temporariamente indesponivel Package: zabbix-agent Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 786 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), debconf (>= 0.5) | debconf-2.0, adduser, ucf, lsb-base Suggests: logrotate Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-agent_2.4.0-1+wheezy_i386.deb Size: 422458 SHA256: aadb84b442da5a47223b4cc188c3a4ac62f53c5fb32fc576480c96b3ad29f43c SHA1: 7125a4a6e25aad9c465015fef585156c73755bcb MD5sum: 1683893e5e58069b1f1cb6119a3e4d32 Description: network monitoring solution - agent Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to monitor a host using a Zabbix agent. Package: zabbix-frontend-php Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: all Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 26475 Depends: debconf (>= 0.5) | debconf-2.0, apache2 | httpd, php5, php5-mysql | php5-pgsql, php5-gd, ucf, dbconfig-common (>= 1.8.19), ttf-dejavu-core | ttf-japanese-gothic Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-frontend-php_2.4.0-1+wheezy_all.deb Size: 5914652 SHA256: 359718b369a35e257df08678d54e1190e415717de52112e4c426f3b57ea9acd2 SHA1: 6c3a885b620e87a6468afb80e71e24fe49e75cd5 MD5sum: 0e4b4813e942b67010a02e932f4fe6cd Description: network monitoring solution - PHP front-end Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides a web-browsable front-end to the Zabbix server, which can display graphs of the data collected from clients. Package: zabbix-get Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 277 Depends: libc6 (>= 2.7) Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-get_2.4.0-1+wheezy_i386.deb Size: 204756 SHA256: 82ce8d808a480ca505ca563919ed3ce6b4372f934f445835d0e6f950c47f5d7d SHA1: e5287dc58e0b743c655321ace9b9ae37ece74e96 MD5sum: 28903c7418b2b4d39458c68120049ea4 Description: network monitoring solution - get Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the command line utility needed to get data from agent. Package: zabbix-java-gateway Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 835 Depends: java6-runtime-headless | java7-runtime-headless, adduser Suggests: logrotate Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-java-gateway_2.4.0-1+wheezy_i386.deb Size: 719916 SHA256: cc42115eebc9d1272661d9f8cfcbf191b04b306943abf55824579ccac1ab60a3 SHA1: 50454b86c17aab81c134de03f3afdc1bedaf881b MD5sum: 775ab3e5fa62055f48787d4c0c148b7b Description: network monitoring solution - java-gateway Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to monitor a Java application using a Zabbix Java gateway. It collects information from JMX agent. Package: zabbix-proxy-mysql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1610 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libmysqlclient18 (>= 5.5.24+dfsg-1), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, mysql-client | virtual-mysql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: mysql-server (>= 4.0.16-2) Suggests: logrotate Conflicts: zabbix-proxy-pgsql, zabbix-proxy-sqite3 Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-mysql_2.4.0-1+wheezy_i386.deb Size: 596456 SHA256: 166616f10f3fa0f3e8a1a8b06cba607be7e430364e9a956e298ada101e061449 SHA1: 86166c9b9d7669606f7082fe729f654e6de73e50 MD5sum: 96001b0c4b7c7b8533c137f6194199e3 Description: network monitoring solution - proxy (using MySQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in a MySQL database and then passes it to a Zabbix server. Package: zabbix-proxy-pgsql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1605 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libpq5, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, postgresql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: postgresql Suggests: logrotate Conflicts: zabbix-proxy-mysql, zabbix-proxy-sqlite3 Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-pgsql_2.4.0-1+wheezy_i386.deb Size: 597290 SHA256: 59cdab793095f0ec71eb53f89ac0e715ebca352e1d24c975aa8d6a8e9988a8f6 SHA1: 488c22c688199e48b27b473a04bfd9d9247af115 MD5sum: 8f13d70a5a60918870ef2dae702c0284 Description: network monitoring solution - proxy (using PostgreSQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in a PostgreSQL database and then passes it to a Zabbix server. Package: zabbix-proxy-sqlite3 Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 1578 Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libsqlite3-0 (>= 3.5.9), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, sqlite3, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Suggests: logrotate Conflicts: zabbix-proxy-mysql, zabbix-proxy-pgsql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-proxy-sqlite3_2.4.0-1+wheezy_i386.deb Size: 584114 SHA256: 4315e5037c660664a968bd806904eb026a4553b3b000c9c581c195ff55d1368c SHA1: bfb6d65058d9febf4936f43af22e1d12fa0ac585 MD5sum: 1dadc9e2cd8413b28fa48552338085e2 Description: network monitoring solution - proxy (using SQLite3) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix proxy. It collects information from Zabbix agents, temporarily stores it in an SQLite3 database and then passes it to a Zabbix server. Package: zabbix-sender Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 296 Depends: libc6 (>= 2.7) Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-sender_2.4.0-1+wheezy_i386.deb Size: 214572 SHA256: dde482f96ba0f1e6eda7946673237d59565c5e97686e1ff29d9f9c86e7c5f937 SHA1: 232a4499d652eb1495a09580a4d08d890ae3df22 MD5sum: 454ab88d218e62d7a397f7bd7ef7b971 Description: network monitoring solution - sender Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the command line utility needed to send data to Zabbix server or Zabix proxy. Package: zabbix-server-mysql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 7470 Pre-Depends: debconf Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libiksemel3, libldap-2.4-2 (>= 2.4.7), libmysqlclient18 (>= 5.5.24+dfsg-1), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, mysql-client | virtual-mysql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: mysql-server (>= 4.0.16-2), snmpd, snmptt Suggests: zabbix-frontend-php, logrotate Conflicts: zabbix-server-pgsql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-server-mysql_2.4.0-1+wheezy_i386.deb Size: 2922442 SHA256: 8bf3d4d715aef7f6c64d7630d6ac9f99224d068845522f9219854efa62634fed SHA1: 0b0e38b152b9580ce09fca53eee9cf690d5a9ed8 MD5sum: f182ec664744c5b5713f718754e531a3 Description: network monitoring solution - server (using MySQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix client. It collects information from Zabbix clients and stores it in a MySQL database. Package: zabbix-server-pgsql Source: zabbix Version: 1:2.4.0-1+wheezy Architecture: i386 Origin: Zabbix Maintainer: Kodai Terashima Installed-Size: 7284 Pre-Depends: debconf Depends: libc6 (>= 2.7), libcurl3-gnutls (>= 7.16.2), libiksemel3, libldap-2.4-2 (>= 2.4.7), libodbc1 (>= 2.2.11) | unixodbc (>= 2.2.11), libopenipmi0, libpq5, libsnmp15 (>= 5.4.3~dfsg), libssh2-1 (>= 1.0), libssl1.0.0 (>= 1.0.0), libxml2 (>= 2.7.4), debconf (>= 0.5) | debconf-2.0, postgresql-client, fping, adduser, dbconfig-common (>= 1.8.19), lsb-base Recommends: postgresql, snmpd, snmptt Suggests: zabbix-frontend-php, logrotate Conflicts: zabbix-server-mysql Priority: optional Section: net Filename: pool/main/z/zabbix/zabbix-server-pgsql_2.4.0-1+wheezy_i386.deb Size: 2921882 SHA256: 0ee8d5bf370854f8e9f617420b34617262cd5c4d5403e890eccc7d1785eaeeaf SHA1: 15b6a89e2118adf8f385ac8e0c0dd2701aa8412d MD5sum: 5b07bb29369e695e8c752980bf41cfca Description: network monitoring solution - server (using PostgreSQL) Zabbix is a server/client network monitoring system with many features. It can be used for: . - high level monitoring of IT services; - centralized monitoring of your servers and applications; - monitoring of SNMP-enabled devices; - performance monitoring (process load, network activity, disk activity, memory usage, OS parameters etc.); - data visualization. . This package provides the software needed to integrate a host as a Zabbix client. It collects information from Zabbix clients and stores it in a PostgreSQL database.